DESIGN AND CONSTRUCTION OF A MICROCONTROLER BASED INTELLIGENT EMERGENCY LIGHT SYSTEM

Subscribe to access this work and thousands more




ABSTRACT

This Project presents the design and construction of a microcontroller based Intelligent Emergency Light System. It is based on Hardwired control logic and micro programmed control logic using a real time program known as Assembly language. This Project Intelligent Emergency Light will turn on the Emergency light only during the Dark condition. Ordinary emergency light will be switched ON during the power failure condition. So that if there was a power failure in day time the ordinary emergency light will also be switched on. So there is a loss of power. Our system will continuously monitor the light falling on the LDR sensor and when there was no sufficient light over the LDR & there is a power failure then it will switch on the Light. So that the place at which the circuit was connected will always be in Bright. And if there is a power failure then the power to drive the emergency light was taken from the Battery supplied with the circuit. The Whole system was controlled by the AT89S52 Microcontroller. It continuously monitors the Light in the Room and it will switch ON the emergency light if there is a power failure and the Room was Dark.


 

TABLE OF CONTENTS

 


CHAPTER ONE


INTRODUCTION


1.1   OBJECTIVE OF THE PROJECT


1.2   JUSTIFICATION OF THE PROJECT


1.3  THE SCOPE OF THE PROJECT


1.4   PROJECT REPORT ORGANIZATION


 


CHAPTER TWO

REVIEW OF RELATED LITERATURE
2.0   HISTORY OF EMERGENCY LIGHTS


 
CHAPTER THREE


DESIGN METHODOLOGY

3.1   DESIGN APPROACH
3.2   DESCRIPTION OF THE SYSTEM BUILDING BLOCK
3.3   THE POWER SUPPLY (AC-DC) CIRCUIT THE POWER SUPPLY CIRCUIT


 


CHAPTER FOUR


SYSTEM ANALYSIS AND IMPLEMENTATION

SYSTEM SPECIFICATION
4.0 THE SYSTEM OPERATION PRINCIPLE
4.1 IMPLEMENTATION
4.2 MODE OF CONSTRUCTION


 
CHAPTER FIVE

SYSTEM TESTING, INTEGRATION AND MAINTENANCE
5.1 SYSTEM TESTING AND INTEGRATION
5.2 TEST PLAN AND TEST DATA
5.3 EXPERIMENTED RESULT VS ACTUAL RESULT
5.4 Performance Evaluation
5.5 MAINTENANCE


 


CHAPTER SIX

CONCLUSION AND RECOMMENDATION

6.1 CONCLUSION


Subscribe to access this work and thousands more
Save
Overall Rating

0

5 Star
(0)
4 Star
(0)
3 Star
(0)
2 Star
(0)
1 Star
(0)
APA

Gerald, I. (2018). DESIGN AND CONSTRUCTION OF A MICROCONTROLER BASED INTELLIGENT EMERGENCY LIGHT SYSTEM. Afribary. Retrieved from https://afribary.com/works/design-and-construction-of-a-microcontroler-based-intelligent-emergency-light-system-9850

MLA 8th

Gerald, IKenna "DESIGN AND CONSTRUCTION OF A MICROCONTROLER BASED INTELLIGENT EMERGENCY LIGHT SYSTEM" Afribary. Afribary, 29 Jan. 2018, https://afribary.com/works/design-and-construction-of-a-microcontroler-based-intelligent-emergency-light-system-9850. Accessed 29 Mar. 2024.

MLA7

Gerald, IKenna . "DESIGN AND CONSTRUCTION OF A MICROCONTROLER BASED INTELLIGENT EMERGENCY LIGHT SYSTEM". Afribary, Afribary, 29 Jan. 2018. Web. 29 Mar. 2024. < https://afribary.com/works/design-and-construction-of-a-microcontroler-based-intelligent-emergency-light-system-9850 >.

Chicago

Gerald, IKenna . "DESIGN AND CONSTRUCTION OF A MICROCONTROLER BASED INTELLIGENT EMERGENCY LIGHT SYSTEM" Afribary (2018). Accessed March 29, 2024. https://afribary.com/works/design-and-construction-of-a-microcontroler-based-intelligent-emergency-light-system-9850