Research Papers/Topics in Electrical Engineering

Resource Reservation Scheme with Retrial for Improved Gsm Network Performance

ABSTRACT The need to increase the number of channels in a limited radio spectrum while covering a large area in a mobile cellular network has lead to the use of various cell design techniques. With an increased number of channels, handover calls can be dropped while moving from one cell to another in the search of a better signal or as a result of user mobility. New calls are also blocked when the traffic channels are fully occupied. However, new calls should be treated fairly and not to be e...

A Current Source Inverter-Fed Constant Air Gap Flux Controlled Squirrel Cage Induction Motor Drive.

ABSTRACT In this thesis, a current source inverter fed squirrel cage induction motor drive at constant air gap flux is presented. The drive scheme is conceived to take advantage of the short circuit withstand capability of the current source inverter and the ruggedness (even under harsh conditions) of the squirrel cage induction motor. The variable inverter input dc link current is derivable from either a controlled ac to dc converter or a controlled dc to dc converter. The constant motor air...

ICT Assistive Technology for the Blind and Visually Impaired Persons

ABSTRACT This study sought to understand the role of the Internet in information provision, within the context of other sources of information and everyday information needs. The study also presents findings about the current ways in which people who are blind and visually impaired find information for their everyday lives; the role of the Internet in this process; barriers to using computers and the assistive technologies. A system was designed and created using Visual Basic studio15 to sho...

A Novel Approach for Power System Protection in High Voltage Power System at 132kv

ABSTRACT In this thesis, a novel approach for the protection of transmission lines which utilizes only coefficient energy for both detection and classification is proposed. The fault current signals generated by workspace on MATLAB simulation model have been analyzed using Daubechie-4 (d4) mother wavelet at 7th level decomposition with the help of Wavelet Toolbox embedded in MATLAB. A case study of 132kV, 160km transmission line has been used to test the novel approach. The value of the coeff...

Comparative Analysis of Distributed Power Control Algorithms in Cellular Network

ABSTRACT 7 Wireless Communication is one of the most active areas of technological development of our time. It covers a very wide array of applications that lead to an ever growing demand on the limited radio resources. Consequently, the need for efficient management of the limited radio resources has become imperatively a global issue. The complexity of the cellular system and the propagation channel resulted in the interference issues that degrade the system performance. Transmit power othe...

Improvement on Concurrency Control in a Distributed Database

ABSTRACT The study was conducted of the Improvement on concurrency control in a distributed database. The objectives of the study are to ensure consistent and correct transaction, efficient data collection and management and recoverability of data in a distributed database. The Mysql relational database was employed in collecting data for concurrency control protocols. The Unified Modeling Language (UML) was used in creating the use case, sequence diagram, class diagram and contract for the s...

Monitoring and Control of 3-Tier Power Supply

Abstract Reliable electricity supply is essential for development. As a result, demand for electricity has continued to increase globally, occasioned by the fact that electricity is highly portable and can be transformed from one form to another to meet needs. In Nigeria and most developing countries, electricity supply from the public utility is not only insufficient but highly erratic. The effect of this is adverse on critical and sensitive infrastructure that depend on uninterrupted power ...

Maximum Power Point Tracking of Polycrystalline Photovoltaic Cells Based on Optimized Adaptive Differential Conductance Technique

ABSTRACT Maximum power point tracking of a polycrystalline Photovoltaic (PV) cell using an Optimized Adaptive Differential Conductance (OADC) technique was proposed in this work. This technique enhances the optimum power transfer from PV panel to the load by reducing the tracking latency and increasing convergence efficiency and speed unlike the conventional Incremental conductance. In this research work, current at maximum power point and voltage at maximum power point can be calculated with...

An Analytical Approach to Analogue/Digital Transition in Radio and Television Broadcasting

ABSTRACT The International Telecommunication Union (ITU) has directed some countries of the world to migrate from analogue to digital broadcasting service before June 17, 2015. This transition has many challenges which have been approached in many ad hoc ways by several countries. This study is aimed at formulating a model that could measure the degree of success of the digital transition programme at any stage of the process. It uses control engineering approach, particularly the state varia...

Influence of Saliency Ratio (Xd/Xq) On the Performance of Three-Phase Synchronous Reluctance Generators.

ABSTRACT In the study of the influence of saliency ratio (L/L) on the performance of a synchronous reluctance generator (SRG), this project investigates two typical generator rotor designs: Generator with cage and without cage otherwise known as cage and cageless rotor respectively. A special attention had been paid to the possible rotor geometries of synchronous reluctance machine, SRM. This ratio can directly influence our insight into the machine’s potential abilities. From the studies o...

Open-Loop Variable Voltage Variable Frequency Control of Three (3) Phase Induction Motor for an Electric Vehicle Drive

ABSTRACT This work presented an open loop variable voltage variable frequency (V/F) control of three phase induction motor for an electric vehicle drive. The major advantage of v/f is the ease of implementation. 6 Simulation and practical implementation of the project was carried out using sequential logic circuit for the control of the three phase inverter. Also included in the design is a 120V to 600V boost converter that increases the battery supply voltage to be able to supply the 420V in...

Biometric-Assisted Unique Patient Identifier

ABSTRACT Over the years, healthcare institutions have relied on one or a combination of medical record number (MRN), demographics and issued documents such as name, sex, date of birth, social security number, and identity cards as patient identifiers. But all those have been proven unsuitable and inefficient as patient identifiers due to one or more of the following drawbacks: non-uniqueness, possessiveness, inability to establish the true identity of a patient, and limitedness of applicabili...

Application of Common Management Information Protocol (Cmip) in Atm Network Bandwidth Allocation System

ABSTRACT Asynchronous Transfer Mode (ATM) of transmission is designed as a Broadband Integrated Services Digital Network (B-ISDN) transfer mode that supports a wide range of traffic classes with diverse flow characteristics. ATM guarantees different quality of service (QoS) demands placed on a network by different services (traffic types). The above powerful feats could be well achieved in ATM network with the application of an efficient and effective network resource management system. This ...

Optimisation of Data Throughout for Leo Satellite Downlink Using Trellis Coded Modulation.

ABSTRACT The line of sight communication between an orbiting LEO satellite and its Ground Station is time constrained by duration of visibility and number of visible passes in a day. In Equatorial region like Nigeria, the average duration is short and number of passes is very few. In most cases, the satellite size is small and therefore power generated on-board is also small, consequently the downlink budget is power constrained. Transmission bandwidth is also constrained by Regulations and n...

Academic Portal for Electronic Engineering Department, University of Nigeria, Nsukka

ABSTRACT Internet is a huge technology that has brought life to computer and its applications. Most forms of information management and data sharing are done using the internet. The World Wide Web has made this possible. With a browser running on your PC, you can get connected to the entire world. The Internet has been used in different aspects of life most especially in the area of education. Web portal is that area in which the huge resources available on the Internet are being tapped. A we...


16 - 30 Of 101 Results