This write up is a detail of the process and formulation of plan for the physical realization of the construction of a refrigerator. It is divided into chapter, which discussed extensively the practical refrigeration cycle with full attention given to design factors, working principle and choice of material.
The method used in construction, assembly and arriving at knowing the safety requirements were not left out.
TABLE OF CONTENT
Letter of Transmittal
Release of Page
List of Symbol
Table of Content
1.1 Development of Refrigerator
1.2 Purpose of Construction
1.3 Importance and Specification of Project
1.4 Scope and Limitation
1.5 Statement of the Problem
2.0 Literature Review
2.1 Refrigeration as Related to Thermodynamics Process
2.2 Reversed Heat Engine Cycle
2.3 Replacement of the Expansion Engine by the Throttle Valve
2.4 Condition at the Compressor inlet
2.5 Under-cooling of the Condensed Vapor
2.6 Definition of the Key Terms
3.0 Detailed Information Needed for the Construction
3.1 Safety Consideration
3.2 Unit Description
3.3 Practical Refrigeration Cycle
3.4 Method of Construction and Procedure
3.5 Fitting of the Evaporator
3.6 Other Assembly
4.0 Design Calculation and Analysis
4.1 Heat Leakages Through the Boundary
4.2 The Product Load
4.3 Air Change Load
4.4 The Determination of Standard Component of Design
4.5 Determination of Compressor Size
4.6 The Evaporator Size Capacity
4.7 The Condenser
4.8 The Size of the Capillary Tube
4.9 Piston Displacement
5.1 Analysis and Material Cost Value
5.3 Recommendation for usage of Unit
5.5 Complaints, Causes and Remedies.
Disclaimer: Note this academic material is intended as a guide for your academic research work. Do not copy word for word.
CITE THIS WORK
(2012, 11). Design And Construction Of A Refrigerator.. Afribary.com. Retrieved 11, 2012, from https://afribary.com/read/442/design-and-construction-of-a-refrigerator
"Design And Construction Of A Refrigerator." Afribary.com. 11 2012. 2012. 11 2012 <https://afribary.com/read/442/design-and-construction-of-a-refrigerator>.
"Design And Construction Of A Refrigerator.." Afribary.com. Afribary.com, 11 2012. Web. 11 2012. <https://afribary.com/read/442/design-and-construction-of-a-refrigerator>.
"Design And Construction Of A Refrigerator.." Afribary.com. 11, 2012. Accessed 11, 2012. https://afribary.com/read/442/design-and-construction-of-a-refrigerator.
- Related Works
- Design And Implementation Of An Automated Motor Vehicle Driver’s Licensing System. (a Case Study Of Enugu Motor License Office, Enugu State; Abakpa) Nike).
- Selection Of Water Pumps
- Engineering Drawing In Terms Of Communication
- Construction Of A Screw Conveyor With A Single Phase Electric Motor
- Design And Construction Of A 2000w Inverter
- The Design And Fabrication Of Pressurized Kerosene Stove
- Design And Fabrication Of 80cm X 70cm X 50cm Mobile Deep Freezer
- Design And Construction Of Motorised Wheel Barrow
- Design And Implementation Of Computerized Budget Analysis System (case Study Of Enugu State Ministry Of Finance)
- The Construction Of Sieve Equipment