The candle molding machine is a vital device which cannot be done without, in any nation. This is because of the indispensable role candle plays, especially when there is no either source of light.
In order to enhance adequate supply to both urban and rural consumers, the production of a candle molding machine is important.
The major component of the candle molding machine are: the castled aluminum body, the adjustable screw, which serves as a separation between the too moulds cop and drag (male and female).
The reason why there is no cooling system is because the body is made of non â€“ ferrous metal (aluminum) which does not create much vacuum for heat addition as much as steel do and also the mould has operate in opening system which admit natural air inside the mould when opened to cool the max and enhance the quick solidification of the wax. The mould due to its opening system, it works more efficiently under cool whether condition.
TABLE OF CONTENTS
Letter of Transmittal
Table of Contents
1.1Background Information of Candle Moulding Machine
1.2Problems of the Project (Candle Moulding)
1.2.1Lack of Research Materials
1.2.5Thread Centering Mechanism
1.3Aims and Objectives of the Investigation on Candle Moulding Machine7
1.3.1Production of Cost of Production
1.3.2Improvement on the Pouring Mechanism
1.3.3Improving Market Demand
1.3.4Improving of the Thread Centering Mechanism
2.2One Structure System
2.3The major problems foreseen in such a system are
2.4The threading device
2.5The feeding channels
Design Concepts and Analysis
Mode of Construction
Conclusion and Recommendation
Disclaimer: Note this academic material is intended as a guide for your academic research work. Do not copy word for word. Note: For Computer or Programming related works, some works might not contain source codes
CITE THIS WORK
(2013, 01). The Construction And Fabrication Of A Candle Moulding Machine.. Afribary.com. Retrieved 01, 2013, from https://afribary.com/read/606/the-construction-and-fabrication-of-a-candle-moulding-machine
"The Construction And Fabrication Of A Candle Moulding Machine." Afribary.com. 01 2013. 2013. 01 2013 <https://afribary.com/read/606/the-construction-and-fabrication-of-a-candle-moulding-machine>.
"The Construction And Fabrication Of A Candle Moulding Machine.." Afribary.com. Afribary.com, 01 2013. Web. 01 2013. <https://afribary.com/read/606/the-construction-and-fabrication-of-a-candle-moulding-machine>.
"The Construction And Fabrication Of A Candle Moulding Machine.." Afribary.com. 01, 2013. Accessed 01, 2013. https://afribary.com/read/606/the-construction-and-fabrication-of-a-candle-moulding-machine.
- Related Works
- Automobile Motor Vehicle Construction
- Design And Fabrication Of Mini Copula Furnace And An Atomizer For The Production Of Powdered Metal From Waste Aluminium Cans
- Design And Construction Of A Refrigerator
- Construction Of A Potable Electric Operated With Radio Control (wireless Remote) Motor Vehicle For Long Valve Bus
- Construction Of An Intruder Alarm System
- The Construction And Fabrication Of Bench Shearing Machine
- Basic Refrigeration & Air Conditioning Technology
- Construction Of A Standard Drawing Desk
- Design And Fabrication Of A Mechanism For Opening And Closing Of High Window Of A Church
- The Fabrication For A Set Of Sieves And Saker