This Nylon sealing and cutting machine has an added advantage of making 800 sealed bags per hour. The constructional machines were sourced locally.
The machine can cut and seal Nylon at a affordable cost. The constructional size of 31 cm x 7.5cm x 12.4 which comprises the following component. The sealing and cutting filament, the transformer with 1000 turns of wire for the secondary and about 1200 turns for the primary.
Others includes the micro switch, telephone tape and aluminum sheet casing.
The machine has high performance and efficiency with reasonable degree of accuracy.
In the fabrication of the machine aluminum sheet were marked and cut to size. The aluminum is placed to protect it from external stress and damage. The filament element and the micro switch converts electrical energy to heat energy. The total cost of the fabrication is N4020 with exclusion of other cost.
TABLE OF CONTENT
Letter of Transmittal
Statement of Fact
Table of content
1.1 Uses of Polythene/Nylon
2.0 Literature Review
2.1 Theory of Sealing
2.2 Sealing of Cellophane
2.3 Types of Sealing
2.4 Mode of Operation of the Machine
3.0 Constructional Procedure
3.1 Cost Estimation
4.0 Maintenance of the Machine
Disclaimer: Note this academic material is intended as a guide for your academic research work. Do not copy word for word.
CITE THIS WORK
(2013, 02). Report On Construction Of Nylon Sealing And Cutting Machine.. Afribary.com. Retrieved 02, 2013, from https://afribary.com/read/927/report-on-construction-of-nylon-sealing-and-cutting-machine
"Report On Construction Of Nylon Sealing And Cutting Machine." Afribary.com. 02 2013. 2013. 02 2013 <https://afribary.com/read/927/report-on-construction-of-nylon-sealing-and-cutting-machine>.
"Report On Construction Of Nylon Sealing And Cutting Machine.." Afribary.com. Afribary.com, 02 2013. Web. 02 2013. <https://afribary.com/read/927/report-on-construction-of-nylon-sealing-and-cutting-machine>.
"Report On Construction Of Nylon Sealing And Cutting Machine.." Afribary.com. 02, 2013. Accessed 02, 2013. https://afribary.com/read/927/report-on-construction-of-nylon-sealing-and-cutting-machine.
- Related Works
- The Design And Cosntruction Of 1000kwa Stabilizer A Project Presented To The Department Of Electrical/electronics Engineering
- Repair And Rehabilitation Of A Faculty Refrigerator
- Construction Of A Model Shell And Tube Heat Exchanger
- Gear Design And Types. (7d)
- Evaluating The Different Methods Of Corrosion Prevention, Control And Monitoring
- Fabrication Of Metal Shelf
- Design And Fabrication Of A Mechanism For Opening And Closing Of High Window Of A Church
- Engineering Drawing In Terms Of Communication
- Repair And Rehabilitation Of A Faulty Air Conditioner In The Mechanical Engineering Department At The Institute Of Management And Technology (i.m.t.), Enugu
- Construction Of Car Touch Intruder Alarm