ABSTRACT
This project is titled the design and construction of a DC to AC inverter system. It is designed to meet up with the power demand in the offices and in homes in the absence of power supply from the national supply authority, NEPA. In order words the device / item serves as a substitute for NEPA which almost monopolises the power supply to people.
It is designed in such a way that it will take up 12v DC from battery and inverts it to an output of 220v, 50H2 AC. It makes no noise during operation and no hazardous carbon monoxide is generated in the surrounding.
This is a feature that makes it safe to use any were when compared to generator. Also, the circuit is capable of charging the battery (i.e 12v source) when the power from the supply authority is on. This greatly reduces the cost of operation of the system.
TABLE OF CONTENT
Title Page
Approval Page
Dedication
Acknowledgement
Abstract
Table of Content
CHAPTER ONE
1.0Introduction
1.1Block Diagram of the Inverter System
1.2Inverter System
1.3Circuit Diagram of the System
CHAPTER TWO
2.0Major Component’s Description
2.1Resistors
2.2Diodes
2.3Capacitors
2.4Transformers
2.5Transistor
2.6Integrated Circuit
CHAPTER THREE
3.0Sectional Description of the System
3.1Oscillator Section
3.2Switching Section
3.3Power Transformer and Inverter Actions
CHAPTER FOUR
4.0Construction Procedure and Testing
4.1Casing and Packaging
4.2Assembling of Sections
4.3Testing of System Operation
CHAPTER FIVE
5.0Installation of the Completed System
5.1Problem Encountered
5.2Cost Analysis
CHAPTER SIX
6.0Conclusion
6.1Recommendation
6.2Bibliography
Subscribe to access this work and thousands more