FABRICATION OF A METALLIC BOOKSHELF

Subscribe to access this work and thousands more
ABSTRACT 
Knowledge could only be obtained successively by the use of books for research. This can be achieved only by preserving books already purchased. As a result we fabricate a metallic shelf made up of metallic sheet; precisely mild steel sheets. The mild steel used for the fabrication of the shelf is 1.5mm (16gauge) mild steel. 
The shelf is made up of 3 partitions. In fabricating the metallic shelf several process where involved. We plundered on the material to be used that can hold the number of the books i.e. the strength of the material.
Thereafter accurate measurements of the mild sheets were made we also considered the rigidity of the metallic shelf. This led us to using square pipes for the support of the shelf. The square pipes were also measured to give the dimensions use.
The already cut square pipes were used form the frame by welding it together. Then the already measured and cut mild sheets were also welded to the frame. The doors are made up of the square pipes and wire gauze welded together. The shelf was also painted to give good outlook after smoothening and filling. Rollers were also fixed beneath to enhance good and easy movement of the shelf due to its weight. 

TABLE OF CONTENT
Title Page
Letter of Transmittal 
Release Page 
Signature Page
Approval Page
Dedication 
Acknowledgement
Abstract 

CHAPTER ONE 
1.1Introduction 
1.2Description of the bookshelf

CHAPTER TWO 
2.1Mode of Operation 
2.2Material selection 

CHAPTER THREE
3.1Fabrication
3.2Fabrication Analysis
3.3Capacity of The Bookshelf
3.4Fabrication Experiment
3.5Construction
3.6Sequence of Operation

CHAPTER FOUR 
4.1Cost of Analysis

CHAPTER FIVE
5.1Conclusion 
5.2Recommendation 
Reference

Subscribe to access this work and thousands more
Save
Overall Rating

0

5 Star
(0)
4 Star
(0)
3 Star
(0)
2 Star
(0)
1 Star
(0)
APA

Ugwu, A. (2018). FABRICATION OF A METALLIC BOOKSHELF. Afribary. Retrieved from https://afribary.com/works/fabrication-of-a-metallic-bookshelf-5024

MLA 8th

Ugwu, Anderson "FABRICATION OF A METALLIC BOOKSHELF" Afribary. Afribary, 29 Jan. 2018, https://afribary.com/works/fabrication-of-a-metallic-bookshelf-5024. Accessed 22 Feb. 2024.

MLA7

Ugwu, Anderson . "FABRICATION OF A METALLIC BOOKSHELF". Afribary, Afribary, 29 Jan. 2018. Web. 22 Feb. 2024. < https://afribary.com/works/fabrication-of-a-metallic-bookshelf-5024 >.

Chicago

Ugwu, Anderson . "FABRICATION OF A METALLIC BOOKSHELF" Afribary (2018). Accessed February 22, 2024. https://afribary.com/works/fabrication-of-a-metallic-bookshelf-5024