Abstract Solar energy is gaining more attention than ever before due to its potential ability to provide the world energy needed at a sufficient and reliable rate. Putting more focus on its optimum harvesting and utilization can eventually solve the problem of energy shortage by balancing up the energy demand of the nation. Adequate information on the output voltage of the solar panel to cope with the output current during the daytime is essential to be able to predict accurately the esti...
Abstract The current-voltage characteristic is the basic descriptor of photovoltaic device and is used to test the performance of PV panel. The manufacture specifications on solar panels are obtained under standard condition (solar irradiance of 1000 W/m2, AM 1.5 and operating temperature of 25oC) which is not the real operating condition the solar panels are exposed to on the installation site. With this, the information obtained from the manufacture specifications would not be sufficient...
Abstract: This research work seeks to analyze the radio propagation characteristics of a GSM operative network using Makurdi as a case study. The analysis of radio propagation by a GSM operative entails the characteristics/ behavior of the radio wave between the transmitter and the receiver. An understanding of the radio wave propagation characteristics of an environment is a necessary condition for effective radio network planning which translate to the determination of the coverage ...
Abstract A study has been carried out on the forward bias dark current and the short circuit current-open circuit voltage characteristics of a-Si: H pin solar cells over wide range of illumination intensities. Results are presented with superposition of these characteristics over extended current voltage regimes. This and the observed separation between these characteristics are consistent with the arguments presented based on first principle arguments.
Both the origins of the high open circuit voltages (VOC) in amorphous silicon solar cells having p layers prepared with very high hydrogen dilution and the physical structure of these optimum p layers remain poorly understood topics, with several studies offering conflicting views. This work attempts to overcome the limitations of previous studies by combining insights available from electronic measurements, real time spectroscopic ellipsometry, atomic force microscopy, and both high-resoluti...
In order to stabilize the global climate the world’s governments must make significant commitments to drastically reduce global greenhouse gas (GHG) emissions. One of the most promising methods of curbing GHG emissions is a world transition from fossil fuels to renewable sources of energy. Solar photovoltaic (PV) cells offer a technically sustainable solution to the projected enormous future energy demands. This article explores utilizing industrial symbiosis to obtain economies of scale an...
This paper investigates the feasibility of implementing a hybrid solar photovoltaic (PV) + combined heat and power (CHP) and battery bank system for a residential application to generate reliable base load power to the grid in Ontario. Deploying PV on a large-scale has a penetration level threshold due to the inherent power supply intermittency associated with the solar resource. By creating a hybrid PV+CHP system there is potential of increasing the PV penetration level. One year of one seco...
The recent development of small scale combined heat and power (CHP) systems has provided the opportunity for in-house power backup of residential-scale photovoltaic (PV) arrays. This paper investigates the potential of deploying a distributed network of PV CHP hybrid systems in order increase the PV penetration level in the U.S. The temporal distribution of solar flux, electrical and heating requirements for representative U.S. single family residences were analyzed and the results clearly sh...
In order to alleviate production costs and increase the environmental performance of solar photovoltaic manufacturing, an eco-industrial park for GW-scale production of PV is proposed. This article quantifies the inputs and outputs for the glass manufacturing component of such a system using standard manufacturing techniques. Utilizing industrial symbiosis in this way, potential reductions for such a plant were found to be about 30,000 tons/year in raw materials and over 220,000 GJ/year in em...
"The Ontario feed-in tariff (FIT) for solar photovoltaic (PV) technology has provided Ontario's Aboriginal communities with an opportunity to i) weaken the cycle of poverty; ii) directly counteract climate change by producing renewable energy; and iii) become more self-sufficient. This paper critically analyzes the technical, cultural, and economic viability of leveraging the FIT for PV to provide green electricity and revenue to assist First Nations communities in sustainable development. A ...
The advent of small scale combined heat and power (CHP) systems has provided the opportunity for in-house power backup of residential-scale photovoltaic (PV) arrays. These hybrid systems enjoy a symbiotic relationship between components, but have large thermal energy wastes when operated to provide 100% of the electric load. In a novel hybrid system is proposed here of PV-trigeneration. In order to reduce waste from excess heat, an absorption chiller has been proposed to utilize the CHP-produ...
As the solar photovoltaic (PV) matures, the economic feasibility of PV projects are increasingly being evaluated using the levelized cost of electricity (LCOE) generation in order to be compared to other electricity generation technologies. Unfortunately, there is lack of clarity of reporting assumptions, justifications and degree of completeness in LCOE calculations, which produces widely varying and contradictory results. This paper reviews the methodology of properly calculating the LCOE f...
Nuclear power and solar photovoltaic energy conversion often compete for policy support that governs economic viability. This paper compares current subsidization of the nuclear industry with providing equivalent support to manufacturing photovoltaic modules. Current U.S. indirect nuclear insurance subsidies are reviewed and the power, energy and financial outcomes of this indirect subsidy are compared to equivalent amounts for indirect subsidies (loan guarantees) for photovoltaic manufacturi...
Due to the negative environmental effects of fossil fuel combustion, there is a growing interest in both improved efficiency in energy management and a large-scale transition to renewable energy systems. Using both of these strategies, a large institutional-scale hybrid energy system is proposed here, which incorporates both solar photovoltaic energy conversion to supply renewable energy and cogeneration to improve efficiency. In this case, the photovoltaic reduces the run time for the cogene...
Solar photovoltaic (PV) technology is a means of increasing energy security whilst reducing the negative externalities of fossil fuel dependence. Programs, such as feed-in-tariffs (FITs) implemented in many countries for on-grid PV, provide economic incentives for investment. On the other hand, off-grid PV systems reduce energy poverty and increase both entrepreneurial productivity and return in rural isolated areas. Despite these social and economic justifications, there is still limited acc...