ABSTRACT
This Project report presents details of the design and construction of a microcontrollerbased
automated intelligent street lighting system. The circuits are designed specifically
for self-intelligence and fault detection of the system.
The street light system consists of two circuit boards; the main printed circuit boards and
the street light pole printed circuit board.
The major components of the main printed circuit board are PIC microcontroller, GSM
module, voltage translator, multiplexer integrated circuit, resistors, and capacitors, while
the major components of the street light pole circuits are the light dependent resistor
circuit sensors, infrared sensors, PIC microcontroller, capacitor and resistors.
The Light Dependent Resistor is used for Automation, the Infrared sensor is used for
Intelligence; sensing movement and taking the LEDs to a full ON state and the GSM
module for fault detection.
The Printed Circuit Board circuits and their components are housed in its physical
framework. The circuit for the main board and the circuit for the street light pole were tested and worked properly as intended.
IFEDAYO, A (2021). Design And Construction Of An Automated Street Lighting System. Afribary. Retrieved from https://afribary.com/works/design-and-construction-of-an-automated-street-lighting-system
IFEDAYO, AWODEYI "Design And Construction Of An Automated Street Lighting System" Afribary. Afribary, 20 May. 2021, https://afribary.com/works/design-and-construction-of-an-automated-street-lighting-system. Accessed 22 Nov. 2024.
IFEDAYO, AWODEYI . "Design And Construction Of An Automated Street Lighting System". Afribary, Afribary, 20 May. 2021. Web. 22 Nov. 2024. < https://afribary.com/works/design-and-construction-of-an-automated-street-lighting-system >.
IFEDAYO, AWODEYI . "Design And Construction Of An Automated Street Lighting System" Afribary (2021). Accessed November 22, 2024. https://afribary.com/works/design-and-construction-of-an-automated-street-lighting-system