Search Results

A COMPARISON OF BOND PERFORMANCE OF CONCRETE REINFORCED WITH REINFORCEMENTS FROM DIFFERENT MANUFACTURERS

ABSTRACT The transfer of stress from a deformed bar to the concrete is achieved by mechanical locking of the steel into the surrounding concrete. This interfacial bond strength between steel and the surrounding concrete is an important factor influencing the strength and durability of reinforced concrete structure. This paper presents the result of investigation conducted to find out the bond performance of reinforcement from different manufacturer. 12 mm and 16 mm diameter steel specimens fr...

Effect of Crushed Concrete as Coarse Aggregates in Production of Concrete

ABSTRACT In the face of a possible scarcity of natural aggregates in the future in line with sustainable construction, this research investigates the feasibility of the use of recycled coarse  aggregates as an alternative to natural coarse aggregates in structural concrete. The recycled coarse aggregate used in the research was processed from waste concrete. The percentage of recycled coarse aggregates by weight of all in aggregates in the test mixes were 0%, 5% 10% 20% and 30 % respectivel...

Classification of Ultra-high Performance Concrete (UHPC)

Ultra-high performance concrete (UHPC) been an advanced concrete introduced as reactive powder concrete (RPC) over twenty years ago, is now being employed for use in the construction industry of some developed countries like China, Germany and United States of America. Its excellent properties in structural performance and durability make it the civil engineering material that will reshape the future of the construction industry in terms of structural performance; and this paper aims at helpi...

Effect of Coconut Shell Ash (CSA) as an Admixture on the Properties of Cement Paste and Concrete

This paper presents the findings of an investigation on coconut shell ash (CSA) as admixture in cement paste and concrete. The CSA used was obtained by controlled burning of coconut shell in an incinerator to a temperature of between 600–650ºC for 3 hours, air cooled, sieved through 75μm sieve and characterized based on its oxides composition determined using X-ray Fluorescence (XRF) analytical method. The effects of CSA on cement paste were investigated with addition of 0, 2, 4, 6, 8 and...

Evaluation of Mechanical Properties of Palm Oil Fuel Ash (Pofa) Blended – Granite - Gravel Concrete

TABLE OF CONTENTS CERTIFICATION                                                                                        i DEDICATION                                                                                            ii ACKNOWLEDGEMENT                                       �...

EFFECTS OF PALM KERNEL SHELL ASH ON SOME STRUCTURAL PROPERTIES OF CONCRETE WITH RECYCLED COARSE AGGREGATES

Abstract: This paper presents the results of an investigation conducted to determine some structural properties of concrete made with recycled coarse aggregates but containing (PKSA) as partial replacement of cement by weight. Cement was replaced with palm kernel shell ash (PKSA) up to 50% by weight at interval of 5% to produce the concrete used in the investigation. The properties investigated were: setting times, workability, compressive strength, and tensile strength. The results showed th...

A model for the evolution of concrete deterioration due to reinforcement corrosion

One of the most crucial factors affecting the service life of reinforced concrete (RC) structures attacked by aggressive ions is reinforcement corrosion. As the steel corrosion progresses, crack propagation in concrete medium endangers the serviceability and the strength of RC structural members. In this study, a nonlinear mathematical model for determining the displacement and stress fields in RC structures subjected to reinforcement corrosion is introduced. For corrosion products, a nonline...

Simulation Studies of Shear Stresses in Reinforced and NonReinforced Concrete Structures

Abstract A simulation study of the effect of shear stresses in non-reinforced and reinforced structures was carried in this work. Using the Finite Element Method and equations of elasticity, columns and concrete deck of a simple storey structure were subjected to plane strain conditions. The results showed that proper reinforcement causes stresses to be directed into the reinforcements with the resultant shear stresses in the steel reinforcements far below the yield stresses of the steels. In...

Some Later Ages Structural Characteristics of Concrete Containing Empty Palm Oil Fruit Brunch Ash (EPO-FBA) as Partial Replacement of Ordinary Portland Cement

This  paper  presents  the  results  of  the  investigation  conducted  to  assess  the  latter  day  strengths  of  concrete  in  which  the  cement constituent  of  the  mix  has  been  partially  replaced  by  empty  palm  oil  fruit  brunch  (EPO-FBA).  The  structural  parameters  investigated  were: workability,  density  and  compressive strength. Some physical  properties  and chemical  analysis  were conducted.  Slump  test  was  used...

Environmental Benefits of the Structural Use of Pulverised Bone in the Production of Foamed Aerated Concrete

Abstract Disposal of wastes resulting from myriads of human activities continues to be a problem especially in developing nations, where effective and efficient wastes disposal system is lacking. This paper presents the result of the study conducted to investigate the environmental benefits of using pulverized bone - obtained from bones generated as waste from abattoirs and slaughter slabs - in the production of structural foamed aerated concrete. Some of the properties investigated into are ...

Compressive Strength of Concrete with Palm Kernel Shell as a Partial Replacement for Coarse Aggregate

Abstract Shelter is a basic human need. Unfortunately, decent shelter for the masses; the poor have not materialized over the years. The cost of concrete materials in building and civil engineering project has been a concern to the society. These and other things led to the research on Biological local materials that are dumped as waste in our environment, causing pollution and congestion as substitute materials. Therefore, this research work was carried out in respect to that and the researc...

Use of Correlation and Regression Analyses as Statistical Tools in Green Concrete Research

Correlation and regression in this paper were employed as analytical tools to study the degree of relationship as well asthe nature and strength of the relationship between green concrete properties and percentage replacement of cementwith civil engineering materials. Pearson product-moment method and Spearman’s correlation coefficient wereextensively used to show how correlation analysis can be practically applied in green concrete research. Least squareregression line method for both line...

EFFECT OF CURING METHODS ON THE CHARACTERISTIC STRENGTH OF CONCRETE WITH LATERITIC SAND AND PERIWINKLE SHELL

ABSTRACT This study investigates the effect of curing methods on the compressive strength of concrete with fine and coarse aggregates components fully and partly replaced with lateritic sand and periwinkle shell respectively. A total of 90 cube specimens of 100 x 100 mm dimensions for each percentage replacements ranging from 10 to 40% percentage replacement of fine aggregate with lateritic sand and coarse aggregate with periwinkle shell and 100% percentage replacement of fine aggregate w...

Use of Correlation and Regression Analyses as Statistical Tools in Green Concrete Research

Correlation and regression in this paper were employed as analytical tools to study the degree of relationship as well as the nature and strength of the relationship between green concrete properties and percentage replacement of cement with civil engineering materials. Pearson product-moment method and Spearman’s correlation coefficient were extensively used to show how correlation analysis can be practically applied in green concrete research. Least square regression line method for b...

THE COMPARATIVE ANALYSIS OF THE STRENGTH OF CONCRETE MADE FROM VARIOUS AGGREGATE

ABSTRACT The work has gone a long way in determining strength of concrete made of various aggregates such as granites stone, black gravel, washed gravel and surface gravel. Some factors such as porosity of the  aggregate temperature coursing lose of water plate form for mixing of concrete mix affect the workability and eventually the strength of concrete. This project work consist of using hydraulic machine to carryout the compressive test of the strength of concrete made of the earlier ment...


16 - 30 Of 116 Results