THE EFFECTS OF FOAM AND WATER ALTERNATING GAS INJECTION ON PERFORMANCE OF THIN OIL RIM RESERVOIRS
Recovery from thin oil rims are generally affected by the depletion strategies, reservoirarchitecture, operational and reservoir uncertainties. Irrespective of the oil rim thickness,size of the gas cap and aquifer, recoveries are generally low because of pressure depletionrates. Oil recoveries during gas and water injections are also often low due to ineffectivestudy of uncertainties in reservoir parameters. Previous studies on Water Alternating Gas(WAG) injection were based on less profitabl...
LAPLACE TRANSFORM DECONVOLUTION AND ITS APPLICATION TO WELL TEST DATA ANALYSIS
The primary objective of this project is to extend the conveniences ofdeconvolution to non-linear problems of fluid flow in porous media. Unlikeconventional approaches, which are based on an approximate linearization of theproblem, here the solution of the non-linear problem is linearized by a perturbationapproach, which permits term-by-term application of deconvolution. Because theproposed perturbation solution is more conveniently evaluated in the Laplacetransform domain and the standard de...
Enhanced Oil Recovery of Medium Crude Oil (310 Api) Using Nanoparticles and Polymer
The aim of enhanced oil recovery (EOR) is to influence thefluid-fluid properties and fluid-rock properties between theinjected fluid and the residual oil phase to improve recoveryefficiency. New methods of improving recoveries have beeninvestigated since they provide lower risks, costs anduncertainty as compared to exploring for new reserves. Waterenhanced with nanoparticles (nano-fluid) has recently gainedresearch interest for enhanced oil recovery because of thepossible physical and chemica...
Production forecast for niger delta oil rim synthetic reservoirs
The data sets in this article are related to a Placket Burman (PB)design of experiment (DOE) made on a wider range of uncertainties such as: reservoir, operational and reservoir architectureparameters that affect oil rim productivities. The design was basedon a 2 level PB-DOE to create oil rim models which were developed into reservoir models using the Eclipse software and configured under the best depletion strategy of concurrent oil and gasproduction. Approximate solutions to the models was...
Dataset on the beneficiation of a Nigerian bentonite clay mineral for drilling mud formulation
This paper presents dataset on the beneficiation of a Nigerian claymineral for drilling mud application. The experimental designapplied used a Response Surface Design (RSM), which involved 24(2-Level, 4-Factors) to generate statistical models, and analyze thedataset. The independent variables were (Bentonite; X1), (Polymer;X2), (Sodium Carbonate, X3) and (Aging Time; X4). The rheologicalproperties of interest, which forms the response variables, wereselected based on the API specification 13-...
Effect of foam and WAG (water alternating gas) injection on performance of thin oil rim reservoirs
A design of experiment was used to create oil rim models from a wider range of reservoir, operational andreservoir architecture parameters. A response surface model was generated based on a concurrent oil and gasproduction and a Pareto analysis was conducted to ascertain the significance of the parameters. The models wereclassified based on the Pareto analysis and due to the low oil recoveries arising from the complexity of oil rims, aseries of secondary injection schemes were instigated. The...
Effect of Horizontal Well Length Variation on Productivity of Gas Condensate Well
The development of gas reservoirs and the key decisions to bemade concerning gas reservoirs such as the number of wells todrill, well fracturing and capacity of the surface processingfacilities are dependent on its productivity. Condensateblockage caused by liquid build up is difficult to control in theaforementioned reservoirs thereby affecting production. In thiswork, production is optimized from gas condensate reservoirsusing horizontal wells. This is to demonstrate the performanceof horiz...
Optimal sidetrack time evaluation by segmented proxy model
Sidetrack operations which involves accessing a new zone and commingling production gives rise touncertainties and proxy models have shown to be able to incorporate uncertainties and mimic real-lifescenarios to an acceptable degree of accuracy. In this paper, a time-based proxy model which integrates the uncertainties that emerge as a result of several reservoir parameters was developed usingNPV as the objective function. A black oil simulator was used to generate the production profile andNP...
Predicting the Effect of Well Trajectory and Production Rates on Concurrent Oil and Gas Recovery from Thin Oil Rims.
Thin oil rim reservoirs are those with less than a 100 ft. of oil thickness underlain andoverlain by an aquifer and gas cap respectively. Irrespective of the sizes of the aquifer or gas cap,oil rims productivity is usually low due to excessive coning of water and gas. Productionoptimizations are usually carried out before recovery schemes are initiated. One of such is aconcurrent oil and gas production which is used in comparison with sequential production in thisstudy in conjunction with pro...
OPTIMIZING THE MOVEMENT OF PEOPLE AND GOODS IN A LOCAL COMMUNITY USING TRANSPORTATION MODEL
Transportation problem is one of the real regions of utilization of linearprogramming, in this paper, we would take a gander at how to upgrade the separation andtime taken to make a trip starting with one point then onto the next in a Local community,with Otta Local government area as our concentration, utilizing the transportation display.Having the capacity to accomplish this accomplishment would improve the developmentof individuals and merchandise inside the organization by sparing time a...
PREDICTING POST BREAKTHROUGH PERFORMANCE OF WATER AND GAS CONING
Water coning is a serious issue for the oil and gas industry. This poses a bigconcern regarding the costs that to be incurred for separation and equipmentcapacity. Coning is the production of an unwanted phase with a desired phase. Overthe years, many techniques and control methods has been birthed, however, the issueof coning can only be mitigated and not completely discharged. Reservoir andproduction engineers need to understand the basic framework; the parameters thatgreatly influence coni...
Nano Augumented Biosurfactant Formulation for Oil Recovery in Medium Oil Reservoirs
Production from most oil field using waterflooding has proven not to produce residual oil due to numerous factors. Several recovery mechanisms have been applied which to an extent has its own influence both on the environment, percentage recovery and also the cost of purchase. In this blending process the bio-surfactant derived from jatropha oil at different concentrations were augmented with nanoparticles for core flooding experiment. A blend of Bio-surfactant and nanoparticles (B-NPs) is a ...
Doctorate
Covenant University
May 2015 to Present