Abstract: Natural Esters (NEs) with a high proportion of Unsaturated Fatty Acids (UFAs) were used in this research. A Superior Insulating Fluid (SIF) is prepared by blending NEs like Baobab Oil (BAO) and Mongongo Oil (MGO) with a pure dielectric like Kerosene (KER) and subjected to ultrasonic wave treatment at 30 kHz. Then, accelerated heating of SIF is carried out in the presence of Kraft Paper (KP) and Copper Plate (CP) for 10 hours a day at 90 °C for 30 successive days. The deterioration...
This paper introduces a groundbreaking approach to revolutionize traditional farming practices by introducing a decision model-based agricultural electrical automation control system. The system integrates cutting-edge technologies, including artificial intelligence (AI), machine learning (ML), and sensor networks, with the goal of enhancing the efficiency and productivity of agricultural processes. By automating key tasks such as irrigation, fertilization, pest control, and harvesting, the s...
The high proportion of grid-connected intermittent energy such as wind power and photovoltaic makes the demand for power system flexibility increase sharply. In order to improve the overall flexibility of new energy high permeability system and enhance the economy of power system, promote the new energy consumption of system. This paper presents a multi- time scale Coordinated optimization strategy for the new energy high permeability power system considering flexibility requirement (MTS...
A modeling with a good predictive rate is necessary to create a good performance of the predictive controller . The correct and better model to use is the Predictive Control Model (MPC) or the Predicted Control Model. This study determines the control optimization system with the Predicted Control Model for the plant of Multi Input Single Output (MISO). The MPC optimal control system designed for the closed-loop Mismatch method, the effect of changes in the Kalman amplifier state estima...
This research was designed to comparatively analyze practical skills acquisition in the Electrical/Electronic Engineering department in Accra and Kumasi Polytechnics. The study population was made of 578 students in the Department of Electrical/Electronic Engineering from the two study institutions respectively. A sample size of 25% was randomly selected from the total population. A total number of 145 questionnaires were distributed and 123 completed questionnaires were received making a res...
The purpose of this paper is to perform path tracking for a non-holonomic mobile robot subject to kinematic disturbances using model prediction and H-2/H-infinitycontrol and by Gain-scheduled control law. In this method, the problem of tracking a mobile robot is expressed in such a someway that its kinematic error is in the form of linear parameter variable with bounded disturbance, the purpose of the design is to stabilize the controller by solving the LMI conditions for the error tracking...
Introduction This paper considers the influence the electrical engineer wills in any community and aims at the following: (1) Sensitization of electrical engineers towards self sustenance (11) The electrical engineer as a job creator. (iii) the electrical engineer as an employer. (iv) The role of electrical engineers in the creation of cottage industries and long term investments. The paper hinges its arguments on the commercialization of ideas as a basis for sustenance through lone term inv...
ABSTRACT We have been using polycrystalline thin films of anhydrous cadmium chloride (CdCI2) as an electron beam positive resist for the fabrication of features in SO2- coated silicon wafers The kinetics and mechanism of the electron-beam-induced decomposition of CdCI, which is the resist reaction, have been studied in details this work required that we know the thickness and density of the film. In the ordinary way of things, film thickness and density determination is a routine matter, but ...
ABSTRACT The e-beam stimulated reaction, CdCI2(s) ---> Cd (s) + CI(g), has been studied in casmium chloride thin films between 303 and 483 K using 2-keV electrons. The dose required to make 90-nm-deep holes at 483 K is 3x10-3 C cm -2. Extrapolated dosing levels of 6x10-5 C cm -2 are expected. The use of CdCI2 as a positive-type electron resist in a new scheme is proposed. A working model, useful for considering the e-beam stimulated decomposition energetics and mechanism is briefly discussed.
ABSTRACT In Nigeria, a satisfactory degree of reliability has not been attained in our power systems in recent times. The average duration of interruptions that customers experience is quite high and the degree varies from place to place. This is evident all around the nation, most especially in urban commercial cities. Previous researchers have focused on the assessment of power system reliability indices using different models. In this work, a computationally efficient modified linear con...
ABSTRACT A general model for the e-beam induced decomposition of covalent and ionic inorganic solids is outlined.
The growing gap between electric power generated and that demanded is of utmost concern especially in developing economy, hence calling for measures to argument the existing power generated of which DG is a more viable aspect to explore in curtailing this challenges; although been confronted with issue of location and sizing. This research applied Adaptive neuro fuzzy logic technique to optimize DG location and size. A 24 bus radial network was used to demonstrate this process and having a su...
Fuzzy logic, being a very robust artificial intelligence technique, was employed to forecast short term load in this work. The algorithm was demonstrated with the help of seven months average daily load data collected from Power Holding Company of Nigeria (PHCN). The outcome realized from the model or simulation illustrate that the projected forecasting technique, which propose the use of weather alteration such as temperature and humidity, gives load forecasting results with substantial prec...
The growing concern for the need to reduce the gap between power generated and power consumed in Nigeria is on the increase. Many measures and policy have been geared by Nigeria Electricity Regulatory Commission and Ministry of Power to revamp the generation aspect of the country power sector but the impact is yet to be felt as the amount of power still generated is far below par compared to other countries. Nigeria average power generation stands at an average of 5800 MW. With the call to...