ABSTRACT
Water Purification Unit or filtration unit is designed in way that it will give a nice result. Like in our filtration, we have sand and carbon filter that were responded to separate the suspended solid particles, odour and taste of the water, which will give a very nice filtered water at the end of the filtration. This unit has no chemical engineering operation, but a physical separation process that will separate the dead micro organisms and the task, colour odor of the water. The chlorine content or amount of chlorine that should be close to water that full our bucket should be 4mgll and if it is hard water it will be reduced to 3mgll. The sand was suspended on a net, where it was arranged in layers, gravel or coast sand, semi coast, and fine sand, while in carbon, also suspended on a net, where coast sand was first layer before the polished and graded carbon.
TABLE OF CONTENT
ABSTRACT
TITLE PAGE
CHAPTER ONE
INTRODUCTION TO WATER PURIFICATION UNIT.
OBJECTIVES OF THE WORK
THE SCOPE OF THE WORK
METHODOLOGY
CHAPTER TWO
LITERATURE REVIEW
CHAPTER THREE
CONSTRUCTION OF WATER PURIFICATION UNIT MATERIAL SELECTION
CHAPTER FOUR
TESTING OF THE EQUIPMENT & DISCUSSION
CHAPTER FIVE
CONCLUSION AND RECOMMENDATIONS
RECOMMENDATIONS