ABSTRACT The project is designed to automatically supply continuous power to a load through one of the three sources of supply that are: solar, mains and generator or to combine the sources to supply the load all together at the same time. The three socket outlets represent the three sources. The sockets outlets are connected to three step down transformers which reduce the input 230V or 240V to 12Vac. These 12Vac are rectified and regulated to 5Vdc which act as an input to the microcontrolle...
TABLE OF CONTENTSDECLARATION ............................................................................................................................. iAPPROVAL ....................................................................................................................................iiDEDICATION................................................................................................................................iiiACKNOWLEDGEMENT.............................................
TABLE OF CONTENTSDECLARATION....................................................................................................................................iDEDICATION.......................................................................................................................................iiACKNOWLEDGMENT ......................................................................................................................iiiAPPROVAL................................................
Abstract This project proposal is of a clap switch device. Clap switch is a switch which can switch on/off any electrical circuit by the sound of the clap. The basic idea of clap switch is that the electric microphone picks up the sound of your claps, coughs, and the sound of that book knocked off the table. It produces a small electrical signal which is amplified by the succeeding transistor stage. This circuit has been constructed using basic electronic components like resistors, transistor...
TABLE OF CONTENTSDECLARATION................................................................................................................iiAPPROVAL..................................................................................................................... iiiDEDICATION...................................................................................................................ivACKNOWLEDGMENT .......................................................................................
TABLE OF CONTENTSDECLARATION ............................................................................................................. iiiAPPROVAL ................................................................................................................... ivACKNOWLEDGEMENTS.................................................................................................. vABSTRACT ..........................................................................................................
Table of ContentsAPPROVAL..................................................................................................................................................... iACKNOWLEDGEMENT ................................................................................................................................ iiDECLARATION............................................................................................................................................ iiiABSTRACT..............
ABSTRACT In modern technology, wireless communication is widespread and it started to be used in everyday life, for example, Wireless phone chargers, home automation systems, etc. widely use wireless communication. People want smart systems to make their life easy, and I want to discard the cables that limit our mobility. The purpose of this project is to design and implement a free intercom system that uses WIFI in p2p (Peer-to-Peer) or WLAN (Wireless Local Area Network) as a means of commu...
ABSTRACT FM bugger is a device which generates frequency modulated signal. It is one element of a radio system which, with the aid of an antenna, propagates an electromagnetic signal. Standard FM broadcasts are based in the 88 - 108 MHz range. The signal (from the microphone) is fed into the audio frequency (AF) for amplification then to the modulator which combines the modulating signal with the carrier wave transports the modulated signal through (RF) for final amplification to the antenn...
ABSTRACT This project report is an excerpt of the design of a Micro-controller based Access Control Lock system implemented to assist the university with the aid of security personnel in the prompt detection of students who have not completed necessary fees payment and to checkmate the problem of the ever increasing rate of examination impersonation perpetuated by students. The Micro-controller based Access Control Lock system is an automatic software-based system having two major parts; the...
ABSTRACT In this project work, a hybrid cloud system using StackOps Distro Community Edition was designed and implemented. The Electrical and Electronic Engineering Department of the Federal University of Technology, Owerri was used as a case study. This is essential as there is greater need for readily available and on-the-go Information and Communication Technology services. Ubiquitous access to data, files, documents, project work and the like are vital in all spheres of life, and especia...
ABSTRACT According to the definition of Third Generation Partnership Program (3GPP), Machine Type Communication (MTC) is a new type of data communication between machines and devices without human interactions. Long Term Evolution (LTE) is a recent 3GPP cellular standard and is a promising technology to support future MTC data traffic. One of the main goals of LTE is to provide fast and seamless handover from one cell to another to meet strict performance requirements while simultaneously ke...
ABSTRACT A means of providing radio broadcasting services by using Frequency Modulation (FM) technique is called FM Broadcasting. Aeronautical Communication Service refers to radio communication service intended for the safety operations of aircrafts. Aeronautical communication service is categorized by International Telecommunication Union (ITU) as a primary service. This service needs to be offered under frequency interference free environment for ensuring aircrafts navigation safety. Howe...
The exponential growth of mobile data traffic affects not only the capacity requirements of the mobile networks, but even the expected quality of service. The introduction of LTE improved the situation to some extent. However, as a high percent of mobile data traffic is generating from indoors, LTE operating at higher frequencies cannot really meet the ever-increasing demand of data traffic and reasonable quality of service. This Thesis provides an analysis of the network throughput with LTE ...
ABSTRACT Models for radar detection targets under complex electromagnetic environment were established, including clutters and active electrical jamming. MTI filter based clutter rejection technique is presented. RADARs with fixed carrier frequency profile are vulnerable to jamming; Frequency agility is one of the best techniques used for anti jamming by changing the carrier frequency of the radar.