Report on Construction of Nylon Sealing and Cutting Machine.

Overview
Cite Work

ABSTRACT

This Nylon sealing and cutting machine has an added advantage of making 800 sealed bags per hour. The constructional machines were sourced locally.

The machine can cut and seal Nylon at a affordable cost. The constructional size of 31 cm x 7.5cm x 12.4 which comprises the following component. The sealing and cutting filament, the transformer with 1000 turns of wire for the secondary and about 1200 turns for the primary.

Others includes the micro switch, telephone tape and aluminum sheet casing.

The machine has high performance and efficiency with reasonable degree of accuracy.

In the fabrication of the machine aluminum sheet were marked and cut to size. The aluminum is placed to protect it from external stress and damage. The filament element and the micro switch converts electrical energy to heat energy. The total cost of the fabrication is N4020 with exclusion of other cost.

TABLE OF CONTENT

Title Page

Letter of Transmittal

Statement of Fact

Abstract

Dedication

Acknowledgement

Table of content

CHAPTER ONE

1.0 Introduction

1.1 Uses of Polythene/Nylon

CHAPTER TWO

2.0 Literature Review

2.1 Theory of Sealing

2.2 Sealing of Cellophane

2.3 Types of Sealing

2.4 Mode of Operation of the Machine

CHAPTER THREE

3.0 Constructional Procedure

3.1 Cost Estimation

3.2 Recommendation

CHAPTER FOUR

4.0 Maintenance of the Machine

4.1 Conclusion

4.2 Reference

Read Download

Report on Construction of Nylon Sealing and Cutting Machine.

Related Works