A PROPOSED DESIGN FOR THE CORRECTION OF FOULING IN CONDENSERS

Overview
Cite Work

ABSTRACT

The two most common condenser tube problems faced by industrial users are internal tube fouling and tube failure. Fouling can have a major impact on the generating efficiency or the capacity of the condenser while the tube leaks or failure can seriously impact unit availability and reliability. Fundamental understanding of the root cause(s) of these issues and their alleviation is essential to resolving these problems and/or preventing their future occurrence.

TABLE OF CONTENTS

CONTENTS PAGES

Title page…………………………………………………………………………..i

Dedication…………………………………………………………………………ii

Acknowledgement………………………………………………………………...iii

Table of contents…………………………………………………………………..iv

Abstract……………………………………………………………………………vi

CHAPTER ONE

1.0 INTRODUCTION……………………………………………………………1

CHAPTER TWO

2.0 LITERATURE SURVEY (condensation in the olden days)………………………………3

2.1 Operation principle of a condenser………………………………………………………..5

2.2 Components of the condenser……………………………………………………………...6

CHAPTER THREE

3.0 Fouling in condenser and condenser tube failure……………………………………………11

3.1 categories of condenser tube failures………………………………………………………..11

3.2 Fouling………………………………………………………………………...13

3.3 Types of Fouling………………………………………………………………13

CHAPTER FOUR

4.0 Fouling Removal………………………………….........................................17

4.1 Fouling prevention…………………………………………………………..19

4.2 Condenser tube failure correction…………………………………………...20

4.3 Prevention and avoidance of condenser tube failure………………………..20

CHAPTER FIVE

5.0 Conclusion……………………………………………………………………21

5.1 Recommendation……………………………………………………………..21

REFERENCE……………………………………………………………………21

Subscribe to access this work and thousands more

Subscribe & Access

A PROPOSED DESIGN FOR THE CORRECTION OF FOULING IN CONDENSERS

Related Works