Irrigation Monitoring And Control System Using Internet Of Things

ABSTRACT

Agriculture is considered as the basis of life as it is the main source of food and other raw

materials. This report describes an IOT Irrigation Monitoring and Control system wherein,

the user can monitor and control the supply of water from a remote location.

The system makes use of a concept called TOT (Internet of Things). This enables the system

to be connected to the internet using a Wi-Fi module. An Arduino Uno board was used to

send the control signals and connect to the designed website. The circuit is designed to keep

checking the moisture content of the soil by means of a moisture sensor and updates the

"Moisture level" on the website.

The user can then check the current moisture level from a remote location and control the

water supply. Consequently, the soil-moisture gets monitored and the 'water supply can be

controlled just by toggling the Motor status from 'ON-OFF' or 'OFF-ON' and the "water

pump" will be 'turned ON' or 'turned OFF' accordingly.

The farm model gets irrigated without the fanner necessarily reaching out to the farm land.

A future scope on this project would be to integrate an automatic control system to monitor

and control the availability of water in the water tanks.

Read Download