PRODUCTION OF EMULSION POINT WITH THE AVAILABLE MATERIAL

Overview
Cite Work

ABSTRACT

This project is on the production of paint from the available materials. The first process involved was the sourcing of the available material which include calcium carbonate (dotonute) water etc. the next step is the proper production procedure. The same product patterns was employed while the production was valued with a view to obtain a high quality paint.

From the result obtained, it was observed that high quality paint was produced in production category C(3), consisting of 10kg water, 0.1kg titanium dioxide (TiO2), 0.3kg teranol, 0-3 ethylene glycol 0.3kg welting agent, 0.1kg defrayer, 0.2kg thickness 10kg CaCO3, 4kg PVA, 2kg NH3 and 0.5kg white spirit.

The above fact was ascertained by subjecting the various paint produced from different production procedure to quality control test. The quality of this paint in production category C(3) was, opacity 2 coat, PH 8, drying time 1 hour, chalking 190 cycle scrubs, PVA 20%, viscosity 3.8 poises and binder gravity 1.17 and its quality marched with the Standard Organization of Nigeria (SON) approved quality.

TABLE OF CONTENT

Title page

Letter of transmittal

Approval page

Dedication

Acknowledgement

Table of content

Abstract

Chapter one

Introduction

Chapter two

Historical review of paint product

Types of paints

Raw materials for paint production

Quality control test

Chapter three

Production formulation of paint

Method of production

Standard quality of paint

Chapter four

Observation discussions

Chapter five

Conclusion/recommendation

References

Subscribe to access this work and thousands more

Subscribe & Access

PRODUCTION OF EMULSION POINT WITH THE AVAILABLE MATERIAL

Related Works