Utilization of Waste Plastic and Rubber for Commercial Purpose

37 PAGES (6176 WORDS) Chemical Engineering Project
ABSTRACT
Plastic and Rubber materials have become the corner stone of our lives, so it leads to generation of huge quantity of waste. These waste materials are either mixed with municipal solid waste or dumped in an open area leading to increase in the area covered under waste land. Plastic and rubber waste, if not recycled is either land filled or incinerated, where both of them prove to be a disaster to environment. Incineration leads to air pollution whereas dumping the waste in open areas causes contamination of water bodies and soil. Thus, an alternative for treatment of plastic waste and waste rubber tyres is required especially to enable utilization on a commercial scale. Recycling of these wastes is of increasing importance as our economy today is based on ancient system of stewardship where resources are limited and we need to satisfy all aspects of durability and economy. Thus a judicious and appropriate use of resources is required.

TABLE OF CONTENTS

Title Page
Approval Page
Dedication
Acknowledgement
Background of Study
Abstract
Table of Contents

CHAPTER ONE: INTRODUCTION
1.1 Plastics
1.1.1 Types and Uses of Plastics
1.1.2 Plastic Wastes
1.2 Rubber
1.2.1 Types and Uses of Rubber
1.2.2 Rubber Wastes

CHAPTER TWO:
2.0 Literature Review

CHAPTER THREE: WASTE MANAGEMENT
3.1 Plastic and Rubber Wastes Treatment
3.1.1 Landfill
3.1.2 Incineration and Recovery of Energy
3.1.3 Down-gauging (Reduction)
3.1.4 Recycling
3.1.5 Applications of Recycled Rubber and Plastic
3.2 Recent Advances in the Technology for Utilization of Plastic and Rubber 
Wastes for Commercial purpose

CHAPTER FOUR:
4.0 Conclusion
4.1 Recommendations