Abstract: The purpose of this study is the preparation of activated carbon using a suitable industrial sludge. The characterization of two types of industrial sludges showed that paper sludge was a better option over rice husk. The activated carbon produced from pyrolysis of paper mill sludge was chemically activated with various activating agents like zinc chloride, potassium hydroxide and potassium chloride. A systematic investigation of the effect of impregnation ratio, activation temp...
Abstract Cowpeas were prepared into flour by wet dehulling, wet milling into paste and drying; wet dehulling, drying and milling; and wet dehulling, wet milling and foam mat drying. Proximate chemical composition and functional properties (water and fat absorption capacities, foaming capacity, foam stability, bulk density, gelation capacity and emulsification capacity) of flours and of paste prepared by wet dehulling, wet milling and no drying, were determined. Akara from fresh paste and pas...
Abstract Humans have been harnessing solar energy for thousands of years—to grow crops, stay warm, and dry foods. According to the National Renewable Energy Laboratory, “more energy from the sun falls on the earth in one hour than is used by everyone in the world in one year.” Today, we use the sun’s rays in many ways—to heat homes and businesses, to warm water, or power devices. Solar, or photovoltaic (PV), cells are made from silicon or other materials that transform sunlight dir...
ABSTRACT Horizontal well application has sometimes been employed as a way of minimizing excessive water production arising from coning commonly encountered during oil production in vertical wells. Lots of efforts on water coning in vertical wells have been published. Available predictive models in horizontal wells vary from rather simplistic to complex models. This study investigated the development of practical models that combine ease of use with accuracy. Conformal mapping was used to comb...
ABSTRACT This project is on the enhancement of the performance of an Ubakala clay sample for use as drilling mud. A sample of Nigerian clay (Ubakala clay) was used for the project. The clay sample was collected in a raw state, processed and experiments conducted on viscosity which is a very important property of drilling mud. Various concentrations of sodium carbonate were mixed with the clay sample and experiments were conducted to determine the viscosities of the control and the cla...
ABSTRACT Liquid-Liquid Equilibrium (LLE) data of Butyric acid-Water-Toluene ternary system were determined experimentally at a temperature of 30oC and 1 atmosphere. The complete phase diagram was obtained by determining the solubility curve and the tie-lines. The reliability of the experimental tie-line data was ascertained by using the Othmer and Tobias plot. Also, the UNIFAC model equations were used to estimate the activity coefficients of the system using the interaction parameters fo...
ABSTRACT This research presents a flexible design model and robust algorithm for simulation of a crude oil plant which consists of a main column with several side strippers and pumparounds. The model is developed in commercial software HYSYS, Pro/II and Aspen Plus, in order to evaluate the performance of the simulation of these models on personal computers. The development of the mathematical model of the equipments of the unit is based on the relations that are presented in the equilibri...
ABSTRACT The Multicomponent adsorption models and kinetics of deodorization of commercial kerosene (DPK) using conventional and non-conventional adsorbents have been investigated. The adsorbents used were bone char, limestone, silica gel and clay. The influence of contact time, adsorbent mass, pH, temperature, and adsorbent particle size on the rate percent aromatic and sulphur removal was evaluated. The experimental results were fitted to the Langmuir, Freundlich, Redlich-Peterson, Radke...
ABSTRACT The Mass and Energy Balance requirements for the production of potable water quality starting from sea water are presented. On the basis of economics of the process, a twenty (20) stage flash (MSF) plant analysis is presented for the production of 1,500m3 of potable water from sea water as required. The overall analysis seems attractive. The design of the nine pre treatment units and product storage tank are also presented. The quantitative block diagram as presented shows the m...
Environmental pollution is a form of land degradation which has contributed immensely to the reduction of available arable lands and could lead to the total annihilation of the ecosystem if not effectively mitigated. Bioremediation technology offers a biological means which provide an eco-friendly and cost-effective approach for soil remediation in contrast to physicochemical methods. This study aims to evaluate the application of wastewaters and air-injection for the treatment of crude oil c...
The prevalence and high rate of soil contamination have contributed immensely to the reduction of arable lands which might lead to the total annihilation of the ecosystem if not mitigated. Bioremediation employs microorganisms that offer a sustainable approach for the remediation of contaminated soils. This study focus on the evaluation of industrial (brewery) and municipal effluents for the treatment of crude oil-contaminated soil. A microcosm containing 1kg of crude oil-contaminated soil wa...
Table of Contents Introduction General History Major Applications Prosperities PVDF Raw Material Production Processing Membranes Applications of PVDF PVDF Membrane Economics Market and Future Safety and environmental concerns References
ABSTRACT Mature and ripe cashew fruits were harvested, washed and the apples separated from the nuts. The apples were crushed and the juice extracted, sieved and treated with potassium metabisulphite, to check the activities of undesireable microorganisms, before fermentation. A 3-spatula full of true wine yeast, Saccharomyces cerevisiae var. ellipsoideus, was rehydrated and inoculated into a 2.5-liter part of the juice and allowed for 5 days in a room temperature of 32.50C to ferment. After...
Azeotropic distillation of ethanol-water mixture is accomplished by adding a volatile third component to the liquid which changes the volatility of one of the two components more than the other so the components are separated by distillation. The two components to be separated often have similar boiling point components which do or do not azeotrope in the binary mixture, but sometimes there are components which do azeotrope despite having vastly different boiling points. It is likely that in ...
Abstract The CO2–hydrocarbons systems is common in oil and gas industry as a geological fluid. CO2 plays a vital role in biological processes namely photosynthesis, respiration, and actively participates in the carbon cycle. However, the time gradient of carbon dioxide concentration in the atmosphere has become a major global concern. The environmental challenges associated with the control and management of anthropogenic emissions of greenhouse gases have been the focal point of soci...