ABSTRACT This project is concern about the construction of an electrical stove with three oven apartment is described in his project. It was carried out in order to solve the problem often encounter in cooking and drying and at the same time finding an alternative means to replace the use of kerosene and gas for cooking and drying which are often not available due to scarcity of these products, however, the project students have employed the use of electricity which is rending available....
ABSTRACT Man’s impact on global environment system especially in the area of dust extraction is now at a scale where it is disrupting. These dust extractors varies in major ways. The environmental degradation is, in turn contributing to health threat in this part of the globe. Unfortunately most factories, workshops which suppose to posses these machines for dust extractions a re not having them thereby making dust a very dangerous threat to man. Due to this ugly development it,...
ABSTRACT Bookshelf, a Mechanical arrangement of materials were documents are stored, it could be made with metal or wood. But this one is fabricated with metal. The type of metal used in the fabrication is mild steel and square baluters. The undismountable bookshelf which has five partitions and four compartment under went many process namely, the drawing and the dimensioning of the bookshelf, needed materials, the marking out and cutting of the materials, welding, smoothing and filling of ...
ABSTRACT This machine is meant for sealing and cutting of nylon bag of different sizes. This machine is operated with electrical system. This machine can cut and seal nylon of different sizes. It also comprises of materials as follows: Mechanical and Electrical section Mechanical section include the frame structure, lever and the pedal mechanism. Electrical section include the transformer, Regular and the micro switch. TABLE OF CONTENTS Title Page Letter of Transmittal Release of Page...
ABSTRACT This write up is a detail of the process and formulation of plan for the physical realization of the construction of a refrigerator. It is divided into chapter, which discussed extensively the practical refrigeration cycle with full attention given to design factors, working principle and choice of material. The method used in construction, assembly and arriving at knowing the safety requirements were not left out. TABLE OF CONTENT Title page Letter of Transmitta...
ABSTRACT The Turbine Mixer was Fabricated at the ________________________ The method of the fabrication of the Turbine Mixer involves a preliminary computation of the dimensions of the standard Turbine in relation to the dimension of the reacting vessel in which they will be used in. making out, cutting out to sizes, rolling/folding, welding, body filling, glass- papering and painting. The total surface area is 10741.5cm2 The first step taken in the fabrication of the said project was t...
ABSTRACT The main aim of any electric power supply in the world is to provide uninterrupted power supply at all times to all its consumers. Although, in developing countries, the electric power generated to meet the demands of the growing consumers of electricity is insufficient, hence power instability and outage. Power instability or outage in general does not promote development in the public and private sector. The investors do not feel secure to come into a country with constant or frequ...
ABSTRACT This write up focuses attention on a detailed report and account on the process of construction and formulation of plan for the actual and physical realization of the construction of the project work captioned fabrication and construction of a mobile cooling system. The report is therefore divided into chapters and each chapter discussed extensively such that an illiterate refrigerator mechanic who read and comprehends the report can easily carryout the construction of refrigerator...
ABSTRACT It is well known fact that there are numerous problems inherent in the Nigeria Personal Income Tax System. With the present economy, a lot of problem emanated from the assessment, collection and management of personal income tax. Personal income tax is a source of revenue to the government and, therefore, must be saved from the setbacks. Since we are not in an ideal world, the problems associated with personal income tax may not be completely eradicated but can be reduced to a manag...
CERTIFICATIONi DECLARATION AND COPYRIGTHii ABSTRACTiii Dedicationiv ACKNOWLEDGEMENTv Table of Contentsvi LIST OF TABLESix CHAPTER ONE1 1.1 Introduction1 1.2 Motivation statement3 1.3 Problem statement5 1.4 Objective of the study6 1.4.1 Specific objectives6 1.4.2 Research question7 1.5 Scope of the project:7 1.6 Expected outcome of the project8 CHAPTER TWO9 2.0 LITERATURE REVIEW9 2.1 Introduction9 2.1.1 THE POSSIBILITY OF ENGINEERING CODE OF CONDUCT10 2.1.2 INTERPRETING A CODE OF CONDUCT1...
CHAPTER ONE INTRODUCTION 1.1 BACKGROUND OF STUDY The continuous increase in food demand requires a rapid improvement in food production technologies. Food insecurity is a major challenge in developing countries. In a country like Nigeria where the economy is mainly not agriculture based, use of technology to improve on yields is paramount. Agriculture in Nigeria is mainly rain fed. Global warming has led to climate changing thus rendering the rain fed agricultural system...
CHAPTER ONE 1.0 INTRODUCTION 1.1Background to the study The word communication is an interdisciplinary term. Evidences have shown that no man can exist without communication. It has a very great impact on human existence. It gives man the chance to transmit his thought, memories and emotion. This highly occasioned by man to interact with his fellow man. In addition there must be a common understanding communication can therefore be define as the transferring of a though or message to another ...
Cloningof Computer System is very essential in a computing area. This project focusesmore on how computer system could be coupled and maintained effectively andefficiently without any fault during assembling of the system.Throughoutthis project we shall focus on each and every components needed for assemblingand also there functions. The main reason why people go for assembling ofsystem instead of buying a new system is to allow�...
Masonry structures are prone to extensive damage followed by failure and collapse when subjected to loads resulting from wind, earthquake and other natural or man-made events. Recent earthquakes and terrorist acts have clearly demonstrated the need for the development of effective and affordable strategies for the strengthening of masonry. As a response to these challenges, fiber reinforced polymer (FRP) composites are found to offer technically and economically viable solutions. In the...
Ultrasonic Object Detection Project The main aim of this system is to detect object that will be ahead of ultrasonic transducer. This application is very useful in areas like monitoring and also very useful in wild life photography. There are two main parts of the ultrasonic detector. First one is emitter that produces a 40kHz sound wave. Second one is detector that helps to detect 40kHz sound wave. This signal is then sent back to microcontroller. In this system the ultrasonic module is...