This project is mainly intended to prevent the usage of mobile phones in places inside it coverage without interfering with communication channels outside it range, thus providing a cheap and reliable method for blocking mobile communication in the required restricted area only. Although we must be aware of the fact that nowadays lot of mobile phones can easily negotiate the jammer effect are available and therefore advance measures should be taken to jam such type of devices. The main disadv...
ABSTRACT Automatic water level controller for both overhead and underground tank is designed to monitor the level of water in a tank. It displays the level of water and when it is at the lowest level; a pump is activated automatically to refill the tank. When the tank is filled to its maximum capacity, the pump is automatically de-energized. Several circuits are put together to ensure proper working of this design, and the block diagram includes the supply unit, the micro-processor unit, the ...
ABSTRACT T-junction traffic light controller is such a device that will play a significant role in controlling traffic at junctions, to ease the expected increased rush at such junctions and reduce to minimum disorderliness that may arise, as well as allowing the pedestrians a right of the way at intervals rather than being struck down when in a hurry to cross the roads. Such an electrical system with a touch of electronics that control the flow of traffic in a pre-determined sequential patte...
ABSTRACT With advancement of technology things are becoming simpler and easier for us. Automatic systems are being preferred over manual system. The purpose of this project is to design and construct A GSM based home automation using AVR. Using GSM networks, in this project a home power control system has been proposed that will act as an embedded system which can monitor and control appliances and other devices locally using built-in input and output peripherals. The system has a delay of 2 ...
OBJECTIVE OF THE RESEARCH The aim of this research project is to determine and compare the performance of chemically and microwave synthesized activated carbon from corn cob. INTRODUCTION Activated carbon, also widely known as activated charcoal or activated coal is a form of carbon which has been processed to make it extremely porous and thus to have a very large surface area available for adsorption or chemical reactions (Mattson et al., 1971). The word active is sometimes used in place of...
The purpose of embarking on this study was to provide a well-detailed account on the impact of digitization of the Broadcasting Media in Nigeria. The study ascertained the level of media digitization in Nigerian Television Authority, Enugu (NTA) in this Era of ICT and internet operations. The researcher used survey research design to enable her determine the sample size which is 150 through the appropriate statistical method to represent the population of the study. Survey Research Method was...
The study aimed at the design, construction and performance evaluation of a model domestic wastewater treatment plant was carried out. The treatment unit was a Waste Stabilization Pond (WSP) comprised of one facultative pond, three maturation ponds, and a contact filtration unit, all in series. The effluent of the WSP, after filtration through clay media, had the BOD reduced to 15.4mg/l, from 356mg/L indicating a 95.67% removal level. A Faecal Coliform (FC) count of the influent sample gave 1...
ABSTRACT Among various efforts pursued to produce fuel efficient vehicles, light weight engineering (i.e. the use of low-density structurally-efficient materials, the application of advanced manufacturing and joining technologies and the design of highly-integrated, multi-functional components/sub-assemblies) plays a prominent role. In the present work, a composite automotive design methodology has been presented and subsequently applied to the development and assembly of the inner and outer ...