INTRODUCTION The separation operation of drying converts a solid, semi-solid or liquid feedstock into a solid product by evaporation of the liquid into a vapor phase via application of heat. In the special case of freeze drying, which takes place below the triple point of the liquid being removed, drying occurs by sublimation of the solid phase directly into the vapor phase. This definition thus excludes conversion of a liquid phase into a concentrated liquid phase (evaporation), mechanical d...
ABSTRACT In this research project, the various nail were subjected to six environments so as to check the effect of the environments on corrosion of the nails. Two sets of nails were used; normal nail and concrete nail. Six of each type while the other not coated. The research was carried out in the physical chemical laboratory of the institute of management and technology. The environments used are acidic solution, alkaline solution, salt solution, boiled water, air medium and lubricating...
ABSTRACT This research work was carried out to evaluate the laboratory analysis of pipeline products marketing company (PPMC) depot operations. In the course of the research many scholarly articles on the subject matter were reviewed from which the researcher got lot information concerning the topic at hand. Thus making the research work a reliable source of information as far as facts about petroleum products marketing company (PPMC) is concerned. The Pipeline Inspectorate is charged wit...
ABSTRACT This research was carried out with the sole aim of monitoring interface in the transportation of petroleum pipeline products and the analysis of this product from Enugu depot. In the research it was observed that product contaminates each other if interface was not properly monitored and cut at the appropriate time. The three major products that were considered in this research were premium motor spirit (PMS) automotive gas premium (AGO0 and dual purpose kerosene (DPK). The te...
ABSTRACT This research work was carried out to evaluate the different methods of corrosion prevention, control and monitoring. In the course of the research many scholarly articles on the subject matter were reviewed from which the researcher got lot information concerning the topic at hand. Thus making the research work a reliable source of information as far as facts about corrosion is concerned. To ensure this work satisfies the quality expected of it, an experiment was carried out by ...
ABSTRACT This research project was aimed at optimization of adsorption conditions for removal of methylene blue dye using conventionally activated hamburger seed shell. The activated carbon was first prepared from the hamburger seed shell through carbonization at a temperature of 8000C for 2 hours followed by activation using conc. KOH 9m as activating agent at a temperature if 8500C for 1hour. The prepared activated carbon was then used for the removal of methylene blue from aqueous solu...
ABSTRACT Water is one of the most important substances on earth. All plant and animals must have water to survive. If there is no water there would be no life on earth. Disease causing germs and chemicals find their way into water supplies when this happens, the water becomes polluted. The principal objective of this research work is to asses the impurities found in domestic and industrial wastewater. Other objectives are to asses the presence and absence of organic, inorganic and micro-org...
ABSTRACT This research work was carried out to evaluate the different methods of corrosion prevention, control and monitoring. In the course of the research many scholarly articles on the subject matter were reviewed from which the researcher got lot information concerning the topic at hand. Thus making the research work a reliable source of information as far as facts about corrosion is concerned. To ensure this work satisfies the quality expected of it, an experiment was carried out by th...
ABSTRACT The working principles of a window air conditioning system was described with the mode of operationg of the refrigeration cycle and its construcion. The aim of every window Air conditioning system is to achieve cooling. Change of temperature system were discussed with the methods of improving the performance of th window Air Conditioning Unit for better efficiency. This work simply explains how the performance of the window Air Conditioning system can be improved and why it i...
ABSTRACT The project work Rehabilitation and Repair of A Window Unit Air Conditioner exposes us to the internal working mechanism of the window unit a.c. The working principles component unit, faults and effective repairs carried out to ensure the serviceability of the broken down unit. It buttress the need for routine maintenance, and effective repair works to be carried out on the a.c unit as well as other electrical gadget to ensure long service life and efficiency of the required system...
ABSTRACT In this project, three (3) alternative design solutions were considered for the camp-bed. The authors utilize the local raw materials (with cost consideration) for the comments. The merits and demerits of each of the alternative with respect to the considered grip were also discussed and the solutions of the alternatives that best satisfied the limitations were selection, design and cost analysis, production process and operations maintenance and problem encountered during the de...
ABSTRACT It is proposed to design a process plant that will control nitrogen oxide emission from a plant that is producing 90wt% nitric acid of 30,000 tonnes of nitric acid. This capacity is based on 8000hours of operation per year i.e. 330 days. It is proposed that this plant will be located in any location where there is substantial release of nitrogen oxides. The process plant will control about 90% of the nitrogen oxides being emitted from the nitric acid plant. The controller which is ...
ABSTRACT Conveying goods from one place to another via trucks has been a long-held practice because of its usefulness. There are different types of trucks that are available in this regard such as ; two axle, three axle, four axle trucks etc and each with its unique functionality.Businesses relying on the movement of bulky raw materials and finished goods regardless of the distance no doubt require a truck to ease this task.In line with this challenge, it is desired to design and construct a...
ABSTRACT During forging or furnace operation, air is the utility that should be available at all time in order to ensure a smooth and standardized operation. Supplying air manually will reduce productivity and more man hour to accomplish a given task. Thus, an electric blower was designed in this regard with an efficient electric motor as the driver. The suction conditions and other application data are appropriately used to calculate the design parameters such as: suction specific speed, t...
ABSTRACTThe project “microcontroller based intelligent traffic light system with automatic street light and warning light” was designed to tackle the traffic issues in the country so as to establish automatic traffic control and monitoring system with near perfection. The project intelligent traffic light with automatic street light and warning light is a complex microcontroller based project that was designed to control traffic on a four way road network.The system is embedded with sen...