The goal of this paper is to determine the most suitable source of energy for the future between the Renewables and LNG. The paper found that the Renewables are the fastest growing energy source, followed by gas; and transporting gas as LNG is the fastest growing method of transporting gas. Furthermore, the paper found out that for large-scale deployment of the renewables, energy storage is vital, but the cost of storage is high, the material for storage are non-renewable, and there are geopo...
ABSTRACT Circular economy requires sustainable supply of raw materials to industries. Social and economic networks are needed in order to develop circular economies that would drive value chains in renewable resource processing from wastewater into renewable bioplastic products. Current plastic is non-biodegraded which can cause harm to our environment. A pilot scale investigation was carried-out so as to evaluate the feasibility of producing value-added bioplastic from wastewater treatme...
Quality control is a checking test to monitor and ensure the wastewater treatment plant (WWTP) is at optimum efficiency. The tests are usually carried out on samples collected from specific points or stations in the WWTP. The Influent sample, is collected after the fine screens. Aeration basin sludge, iscollected from the point of overflow of the aeration basin, before it is sent to the clarifier. Return Activated Sludge (RAS) sample, is collected from the sludge pumping station. Waste Ac...
Wastewater is made up largely of organic carbon, either in solution or as particulate matter. About 60% is in particulate form, consisting of proteins, amino acids, peptides, carbohydrate, fats and fatty acids. Wastewater treatment plant (WWTP) prevent potential waterborne disease outbreak. This is achieved by the active use of mechanical process and biological process of the treatment plant to treat and convert wastewater into clear effluent that meets specific standard. The effluent water...
The flight dynamicsof an Unmanned Aerial Vehicle(UAV)is the science ofitsorientation and control in three dimensions.The three primary orientations include: the Pitch, the Roll and the Yaw. Therear part of the tailplaneis known as the elevatorcontrol ofanUAVpitch (therotating around the transversal axis). Flight route deviations and flight altitude variations due to hash weather conditions such as shock waves or thunder storm and the wind speed/direction during flight greatly affect the pitch...
One of the advantages of automatic control system is its application to the regulation of internal combustion engines. An area of significance in fuel energy reduction and efficiency improvement is the control engine idling speed. This paper has presented a control system for improved transient response performance of a linearized engine idle speed model. In order to realize the aim of the work, nonlinear dynamics of engine idle speed are obtained and were later linearized. A proportional int...
Abstract—Drilling fluid is a mixture of chemicals used in the drilling operation and it is re-circulated within the well. It function as lubricating agents to keep the drilling tools in good condition, maintain the temperature and pressure, as well as prevent well damage. The drilling fluid may lost in circulation due to the pressure differences because of formation fractures; crevices within the formation. Lost Circulation Material (LCM) is substances that added into the drilling fluid fun...
Many studies are on-going to optimize the properties of composites, this is because composite have found application in different industries due to their advantage of light weight. Scientists have turned their attention to using natural occurring materials for the development of novel materials. Animal waste is playing an important part in this area of application as using it is not only providing benign environmental solution but solving engineering challenges. In this study, the effe...
Supreme likelihoods of fire disasters in buildings from consulted literatures includes: abnormal rise in temperature, gas leakages from gas cylinders and her accessories, and increasing concentration of smoke from burning materials. On this premise, three respective sensors were saddle with the responsibility of monitoring any anomalies from the aforementioned likelihoods of fire in market shops of which their presence above threshold possess a treat to lives and properties. These sen...
Abstract Vocational and Technical Education (VTE) is one of the manpower development programmes of study that is attracting the attention of various countries around the world. Numerous studies on Didactics have demonstrated the effectiveness of student centered methods and strategies to improve results in terms of knowledge, skills, attitudes and values in Technical and Vocational Education and Training (TVET). With the continuous advancement of technology, computer technology has infiltrate...
The growing gap between electric power generated and that demanded is of utmost concern especially in developing economy, hence calling for measures to argument the existing power generated of which DG is a more viable aspect to explore in curtailing this challenges; although been confronted with issue of location and sizing. This research applied Adaptive neuro fuzzy logic technique to optimize DG location and size. A 24 bus radial network was used to demonstrate this process and having a su...
Fuzzy logic, being a very robust artificial intelligence technique, was employed to forecast short term load in this work. The algorithm was demonstrated with the help of seven months average daily load data collected from Power Holding Company of Nigeria (PHCN). The outcome realized from the model or simulation illustrate that the projected forecasting technique, which propose the use of weather alteration such as temperature and humidity, gives load forecasting results with substantial prec...
The growing concern for the need to reduce the gap between power generated and power consumed in Nigeria is on the increase. Many measures and policy have been geared by Nigeria Electricity Regulatory Commission and Ministry of Power to revamp the generation aspect of the country power sector but the impact is yet to be felt as the amount of power still generated is far below par compared to other countries. Nigeria average power generation stands at an average of 5800 MW. With the call to...
The drying and particle size characterization of Danta (Nesogordonia papavereria) and HardCross (Vitex doniana) hardwood sawdusts were investigated at temperatures 80 ºC, 90 ºC and105 ℃. The experimental drying data were modeled using eighteen existing drying models.The results showed that the modified Henderson and Pabis model offered the best fit to thedrying curves of Danta and Hard Cross sawdusts. The experimental data obtained from theparticle size distribution of both the samples we...
The production of soy-yoghurt by fermentation of soymilk with lactobacillus isolated from nunu (a Nigerian indigenous fermented cow-milk) was studied. Soymilk was extracted from whole and dehulled soybean seeds and pasteurized. The fermentation was carried out with both the isolate from nunu and yoghurmet (a commercial yoghurt starter culture of Streptococcus thermophilus and Lactobacillus bulgaricus) as control. The percentage of soymilk inoculated was 70%, 80% and 100% of the broth. Soy-yog...