Abstract In Ghana and other parts of Africa, most traffic management systems are implemented by the use of a timer at each phase. This method of traffic management is inefficient because equal length of green light is assigned to each lane at the intersection; resulting in long wait times for vehicles behind a traffic light with the red signal on, especially when other lanes are vacant. This project addresses problems such as the one stated in the previous sentence through designs and impleme...
Abstract The objectives a welding flux is expected to achieve are many and often mutually incompatible.
ABSTRACT Determining the filtration properties of a mud system requires that experiments be run for both the standard API and the high temperature pressure tests at intervals throughout the duration of drilling an oil well.
ABSTRACT The effect of climate change in recent times has necessitated the need for a controlled environment for the cultivation of many crops which where hitherto cultivated under natural tropical conditions.
ABSTRACT Both Engineering students and praticising engineers are involved in the design and analysis associated with fluid mechanics and thermodynamic problems.
ABSTRACT The plastic extruder system is an important process in the solid waste recycling system.
ABSTRACT Grinding is one of the most Important finishing operations and it is very useful in our automobile industries.
ABSTRACT Reliability indices are considered to be reasonable and logic way to judge the performance of an electric power system.
ABSTRACT The development of a framework for the local production of low-cost injection moulds, using inputs and technical skills available within a typical Nigerian city is the focus of this study.
ABSTRACT Abundant and economical energy is the life blood of modern civilization.
ABSTRACT A biobjective model is proposed for production planning in a multi stage, multi facility production system.
Abstract This paper presents experimental and simulation study of the effects of stress on microstructure and failure morphology of low carbon steel under plane stress conditions. The study has revealed large extension of grains at the point of fracture and, stress and strain looped around the pearlitic faces of the microstructure matrix. The stress and strain distributions in the microstructure have shown that concentration of stress and strain on the pearlite were instrumental to oblique f...
ABSTRACT Chainsaw milling is an inevitable means of preventing quantum wastage of valuable and scarce wood resource in un accesible locations.
ABSTRACT This paper presents a case study in the development and application of a time study model in a rice milling firm.
ABSTRACT Development and enhancement of innovative engineering curriculum is a vital exercise in producing well grounded graduates that can perform in todays world.