Engineering

Research Papers/Topics in Engineering

Moderation of Admission Standards in the Nigerian Polytechnics- An Alternative to Enhancing Quality of Graduates

The qualities of Nigerian graduates have been a source of concern.The polytechnics have come under criticisms as lacking capacities to turn out competent technologists. However,this paper picks this issue from a different angle.The graduating grade so fa sample of engineering students in apolytechnic were correlated with their entry performances (Secondary Certificate and Matriculation Examinations) over three sessions. The correlation was weak (r=0.13;Ho:=0 accepted at =0.025) whil...

FACTORS AFFECTING THE CAPACITY OF TANZANIA INDOOR POWERLINE NETWORKS

ABSTRACT In this study the factors affecting the capacity of indoor powerline networks were investigated. In order establish the factors, first the frequency response at various loads was determined using Anatory et al model. Then the mathematical approximation was used to determine the PSD of noise in dBm/Hz. The mathematical approximation represented the noise of a typical indoor channel similar to that obtained by Liu et al for indoor channel. Since, because of the limitations on the tran...

Optimisation of Rural Biomass Waste to Energy Systems Rachel Namuli

Abstract  Biomass waste to energy conversion systems were traditionally installed on rural farms to manage manure disposal and mitigate odour. These systems provide heating and electricity and are increasingly viewed as sources of revenue. Poorly operated or sized systems will not realise revenue. For farms that would like to install such systems, there is no tool available that optimises the systems prior to determination of their commercial viability. As such, there is a need to optimise ...

Design And Development of Power Distribution Network Fault Data Collection Device, Fault Detection, Location And Classification Using Machine Learning Algorithms

ABSTRACT The detection and location of faults on power transmission lines is essential to the protection and maintenance of a power system. Most methods of fault detection and location rely on measurements of electrical quantities provided by current and voltage transformers. In this work, current sensors and voltage sensors were used in the prototyped model of the data collection device. Training data were collected by taking into consideration variables of a simulation situation like fault...

Rotational Energy Harvesting To Prolong Flight Duration Of Quadcopters

ABSTRACT This thesis presents a rotational energy harvester using brushless direct current (BLDC) generator to harvest ambient energy for quadcopter in order to prolong it flight duration. Quadcopters also known as drones are developed with the intention of operating in conditions where the presence of an on-board human pilot is either too risky or unnecessary, as such they are broadly referred to as UAV (Unmanned Aerial Vehicles). For a drone its endurance is essential in order to achieve op...

Effects Of Liquid Holdup On Hydrocarbon Production In Tapered Tubing String Using Niger Delta Fluid Properties

Abstract Effects of liquid holdup on hydrocarbon production in tapered tubing string using Niger Delta fluid properties was undertaken in this work. Oil reservoir fluids flow to the surface as a multicomponent fluid in pipes during production. Multiphase flow occurs due to the density of different phases involved in reservoir fluid and each fluid phase flow at different velocity. In this study, analytically developed equations and existing fluid correlations were used for determination of pr...

Modelling Levels Of Microbial And Chemical Contaminants In Wastewater Used For Peri-Urban Irrigation In The Tamale Metropolis, Ghana

ABSTRACT Wastewater irrigation can pose a variety of potential health risks and also excessive and often imbalanced addition of nutrients to the soil to affect crop production. Thus its use in agriculture without adequate safeguards has been noted to have serious drawbacks for human health and the environment. This study modelled the levels of microbial and chemical contaminants in wastewater used for peri-urban vegetable crop production for both dry and wet seasons and also assessed the eff...

Evaluation Of The Technical Performance Of A Low Cost Drip Irrigation System For Smallholder Farmers

ABSTRACT It is essential that smallholder farmers in developing countries have access to the benefits that modern irrigation technology seeks to offer. However, this has not always been so because of the inability of smallholder farmers in developing countries to adopt this advanced technology due to cost constraints. The objectives of this study were to design and construct a simple low cost drip irrigation system suitable for smallholder farmers, and to evaluate the technical performance ch...

Determination of Hydrogen Content of Petroleum Products from Tema Oil Refinery Using Neutron Backscatter Technique

ABSTRACT  The hydrogen content of hydrocarbon materials is very important in several areas of industrial process such as mining, vegetable oil extraction and crude oil exploration and refining. A fast and more universal technique based on thermal neutron reflection was employed to determine the total hydrogen contents of petroleum samples from Tema Oil Refinery (TOR) and Crude oil samples from Jubilee field and Nigeria. The experimental set-up consisted of a source-holder housing a 1Ci Am-Be...

Corrosion Behaviour Of Low Carbon Steel Used In Oil And Gas Aboveground Storage Tanks

ABSTRACT The cost and losses associated with corrosion annually is approximately $ 276 billion or 3.1% of the GDP in the USA, 3 - 4% of GNP in Australia, Great Britain, Japan and other countries. The associated cost and losses include aboveground storage tanks for petroleum products. For example, Liberia Petroleum Refining Company (L.P.R.C.) is the national refining company in Liberia. It imports all petroleum products such as lightweight cooking gas, kerosene, diesel, petrol, jet fuel, gaso...

Assessment Of Iron Ore Mining Gangues In Itakpe For Secondaryrecovery Of Other Metal Values

ABSTRACT Due to rapid industrialization, the demand for heavy metals is ever increasing, but the reserves of highgrade ores are diminishing. Therefore there is a need to explore alternative sources of heavy metals. Ore mine gangues which are industrial wastes can act as potential sources of industrial materials. Typical iron ore minerals may contain antimony, arsenic, beryllium, cadmium, chromium, copper, lead, nickel, as well as silver and zinc [6]. The economic viability of these metals wo...

Pressure-Assisted Fabrication Of Organic Light Emitting Devices

Abstract This dissertation presents an overview of the research work with the above caption. This research is divided into five major sections or parts. Part one deals with interfacial adhesion studies of the layers relevant to organic light-emitting diodes (OLEDs).The adhesion interactions, that is, force and energy between different interfaces of the adjacent layers relevant to the OLED structure used in this work are analyzed together with their implication(s) on the device performance. I...

Induced Sickling Of Erythrocytes Via Bending And The Effect Of Mechanical Properties On Cell Pore Entry

ABSTRACT Patients living with sickle cell disease are perpetually plagued with painful crisis episodes, caused by vascular occlusion. Over time, this leads to oxygen deprivation and the eventual damage of starved tissues and organs. Observations stemming from mechanical characterization of both diseased and healthy red blood cells (RBC), establish that shape and mechanical properties of human red blood cells are essential in maintaining normal functionality of these cells. From a molecular b...

Critical Evaluation Of The Correlations Used For Estimating Geomechanical Properties For The Niger Delta

ABSTRACT The study area which is the Niger Delta Province is predominantly an unconsolidated sandstone terrain, the sand grains are friable suggesting the expectation of some geomechanical problems while developing hydrocarbon reserves in such terrain. In this study, the geomechanical property used to measure rock strength (i.e. unconfined compressive strength) was evaluated by using three principal methods. Critical drawdown pressure (CDP) and sand production rate were also evaluated. First...

Substitutional And Vacancy Defects In Two-Dimensional Alsb: A First Principle Approach

ABSTRACT AlSb is a semiconductor material which exist in 3D as well as 2D regimes. AlSb have a high electron mobility which is useful for application in high speed electronic devices. AlSb has potential applications in radiation detection. Defects, including intrinsic and extrinsic have been shown to influence the performance of AlSb for applications in electronic and optoelectronics. In this thesis, density functional theory with the aid of the generalised gradient approximation was use to m...


1486 - 1500 Of 3224 Results