Abstract Safety is crucial in oil and gas industries, it is normal practice to collect incident reports daily. The volume of such reports is always very huge, as a result, the interpretation poses a great challenge. Consequently, there is an urgent need for techniques that can intelligently assist in transforming such vast amount of data into useful information and knowledge. Data mining is part of the knowledge discovery process that offers ways of extracting non-trivial, previously unknow...
ABSTRACT The problem of epileptic power supply and its consequences in the developing countries is a generally known issue. Worst still, the hope that it will be addressed with the deregulation of electricity Industries in recent time are being dashed by flight to top class investors due to its poor implementation. There is a need to provide multiple sources of power and automatic mechanisms for switching from one source to another. This is achieved in this work where quadruple power supp...
ABSTRACT Comparative economic analysis of the use of compressed natural gas (CNG) and the use of AGO for power generation was presented. The data for costs of constructing and running CNG-powered vehicles were obtained for the study. Separate economic analyses of running the CNG-powered vehicles and running AGO vehicles were performed. The initial capital cost for CNG project amounted to N4.31 million and that for diesel was N3.60 million while the annual operating cost for CNG is N1.47 mill...
ABSTRACT A comparative analysis of renewable energy sources for power generation in Nigeria is presented. The three renewable energy resources of solar radiation, wind energy and hydro power were investigated for six locations (Northwest, Northeasth, North-central, Southwest, Southeast and South-south) representing the six geo-political zones of Nigeria. The Hargreaves and Samani model was used to investigate the solar energy potential of the study locations of Sokoto, Maiduguri, Makurdi, Ib...
ABSTRACT The study compared and predicted the remediation rates of microbes using the rate removal of Total Petroleum Hydrocarbon Content (TPHC) of a crude oil polluted land. This was done using field experimental data generated from the soil of the Federal University of Technology Owerri Research Farm in Imo State, Nigeria. The soil was artificially polluted in the laboratory with crude oil - Bonny light - with specific gravity of 0.8323. Petroleum contaminant present in the soil was ...
ABSTRACT Flow assurance is the efficient and successful flow of fluids in pipes. Some of the flow assurance challenges that can be encountered include hydrate formation, which is prevalent offshore, sand deposition, wax precipitation, scale deposits, or emulsion problems. In onshore production facilities in the Niger delta, wax deposition is the major challenge to efficient fluid flow. Consequently, it has been the focus of research to proffer effective predictive control measures to a probl...
ABSTRACT This research work presents buckling and vibration analyses of line continuum using 6 x 6 stiffness matrices. The study used six term Taylor McLaurin’s polynomial series shape function and the stiffness matrices were developed using energy variational principle. Two deformable nodes were considered at the centre of the continuum which brings the number of deformable nodes to six. The six term Taylor McLaurin’s shape function was substituted into strain energy equation and the r...
ABSTRACT With the ever increasing need to optimize production, the accurate understanding of the mechanics of multi-phase flow and its effect on the pressure drop along the oil-well flow string is becoming more pertinent. The efficient design of gas-lift pump, electric submersible pumps, separators, flow strings and other production equipment depends on the accurate prediction of the pressure drop along the flow pipe. Pressure is the energy of the reservoir/well and it is crucial to understa...
ABSTRACT This research focuses on the design of a robust but flexible prodigiosin eluting stent coating for possible coronary cardiovascular implant. When coated with the drug embedded polymer matrix, the stent would be expected to dilate the vessel around the fatty blockages while the drug eluting polymer membrane delivers anti-proliferative drugs over a period of time to prevent the restenosis that otherwise would occur. The goal of this work is to incorporate anti-cancerous drug prodigios...
ABSTRACT The thermal–hydraulics and neutronics parameters of GHARR-1 control systems were assessed for its reliability after 18 years of operation using the Micro-Computer Closed Loop System (MCCLS) and original Control Console (CC). The MCCLS and some components that control the sensitivity and the reading mechanism of the meters on the control systems have been replaced with new ones over the years, due to ageing, repairs and obsolescence. The results show that when reactor is operated a...
ABSTRACT Epoxy, a thermosetting polymer due to its attractive properties, has been widely used in many industries as a coating material such as the oil and gas industries. This study provides an insight into the corrosion behavior of epoxy looking at its adsorption properties at the epoxy steel interface and the adhesion behavior for different corrosion environments. The study was carried out using conventional weight-loss measurements and microscopic observation after immersion in Hcl of va...
ABSTRACT This research describes the application of a production economic approach which attempts to quantity stimulation treatments performed on different wells undergoing a decline phase in their production and to obtain based on the output from the model the best time during the declining phase of the wells to initiate stimulation treatments. Two different production decline models were considered in this work i.e., the exponential model and the hyperbolic model. The optimization models w...
ABSTRACT This study examined the mechanical properties of earth-based materials that are relevant to the future development of affordable housing. Earthcrete structures were produced by mixing various proportions of laterites, clay and cement, while natural fibre-reinforced composites were produced by mixing earth-based matrices with natural fibre (Straw). Mechanical testing showed that optimum performance of the various samples was obtained at a fibre content of 20% by volume, with compress...
ABSTRACT The majority of human population especially in developing countries suffers from waterborne diseases such as skin abscesses, cellulitis, skin infections, and diarrhoea due to improperly treated water. Safe drinking water remains unavailable to a large portion of the global population and this is a global concern. This work focused on the design, construction and evaluation of charcoal, activated carbon, Moringa seed and sand water filtration systems with an objective of evaluating t...
Abstract In the recent decade, hybrid organic- inorganic trihalide perovskite solar cells have attracted significant interest from the scientific community due to their unique optoelectrical properties, ease and low cost of fabrication. Extensive research has been carried out to understand the electrical and optical properties of this novel material with a view to boosting the efficiency of the system. However, not much has been done to understand the mechanical properties of the system. The...