Engineering

Engineering Research Papers/Topics

Techno-economic study of a Biomass Briquetting Unit

The present study analyses the ongoing efforts to solve the fuel crisis of The Western India Plywoods Ltd (WIP), a large wood-based panel industry in Kerala via fuel briquettes from wood wastes generated from its own various manufacturing units with a well proven technique called biomass briquetting. Saw dust and other wood wastes and residues from all types of primary and secondary wood processing operations are generally bulky in nature and are therefore expensive to store and transport. Al...

Evaluation of the Growth and the Nutritional Status of the Leaves and Roots of Moringa oleiferaunder the Influence of Organomineral Amendments in Humid Tropical Region

This study aimed to evaluate the influence of organomineral fertilizer on the growth and mineral composition of Moringa oleifera organs. The experiment included three doses of cow dung, three doses of mineral fertilizers and two doses combining mineral fertilizers and cow dung. Soil samples and samples of M. oleifera organs were analyzed. Results revealed the contribution of fertilizer to improve soil chemical properties, except pH. The best vegetative development was obtained with the d...

Assessment of Post-harvest Handling Practices and Losses of Maize in Ejura-sekyeredumase Municipality

 Introduction to the background of the study: Maize (Zea mays) is the highest produced cereal crop and the most widely consumed food in Ghana with increasing production since 1965 (FAO, 2008; Morris et al., 1999). Maize is cultivated in all the ten regions of the country however the leading producing areas are mainly in the middle-southern part (Brong Ahafo, Eastern and Ashanti provinces) where 84 percent of the maize is grown, with the remaining 16 percent being grown in the northern region...

Assessing Growth Rate of Jatropha Plant (Height and Diameter) Under Different Method of Propagation in Nyankpala In Northern Region Ghana

ABSTRACT The study was carried out at Nyankpala in the Northern region of Ghana from November 2012 to April 2013 to investigate the growth rate of Jatropha plant under two methods of propagation (seeds and cuttings) that best support the growth of the plant. Data on the survival rate, height and diameter were collected and other data were obtained through observation. Each of the plantation was divide into nine (9) plots and five plots were selected randomly for the studies. Each of the plant...

Legal Requirements For Infrastructural Development in Nigeria

There is an inherent correlation between law and pace of infrastructural development. A solid, clear and foreseeable legal construction policy regime forms the basis for infrastructural development. In any form of legal regime, the role of the government and its bureaucracy remains crucial at every stage including licensing, construction and operation of infrastructural development projects. The Corona Virus (Covid-19) pandemic has introduced new construction requirements. This research work ...

Rock Cracks and its Effects on Concrete Structures

In this paper, rocks with existing cracks and the effects on concrete structures it supports is discussed. Based on this paper, rock cracks may occur naturally when the rock gets closer to the earth surface due to erosion, through weathering processes (particularly frost wedging in mountainous areas and the diurnal heating and cooling of a rock outer layer in hot arid environments) and through tree roots. Artificially, cracks in rock may be caused by shock waves during rock blasting. The effe...

Effects Of Heterogeneity On The Petrophysical Parameters Of Sandstone Reservoirs And Volumetrics :Niger Delta

This  study  identified  and  correlated  hydrocarbon  bearing  reservoirs,  interpreted  geological  structures  and  petrophysical parameters  and  described  facies  and  environment  of  deposition  using  seismic  and  well  log  data.  These  were  with  a  view  to assessing  the  impact  of  reservoir  heterogeneity  on  petrophysical  parameters  and  to  determine  the  hydrocarbon  potential  of “Devo”  Field,  Niger  Delta.  Po...

Biofuel Production Potential of Anacardium Occidentale (Cashew)

ABSTRACT Mature and ripe cashew fruits were harvested, washed and the apples separated from the nuts. The apples were crushed and the juice extracted, sieved and treated with potassium metabisulphite, to check the activities of undesireable microorganisms, before fermentation. A 3-spatula full of true wine yeast, Saccharomyces cerevisiae var. ellipsoideus, was rehydrated and inoculated into a 2.5-liter part of the juice and allowed for 5 days in a room temperature of 32.50C to ferment. After...

The Engineering Study on the Use of Crushed Stone Aggregate and Crusher Dust Mixes in Flexible Pavements of Karachi-Hyderabad Motorway, Sindh, Pakistan

The development of the country is directly related with the better road communication from mega cities to rural villages. Pakistan is a developing country and has started a grand network of highways, superhighways and motorways in all four provinces along with Kashmir and Northern and northwestern regions bordering china and Afghanistan. Highway Flexible pavements are the most commonly used form of pavements and have four component layers namely Sub-grade, Sub-base and base and surface course...

Engineering Properties of Nagar Parkar Plutonic & Volcanic Rocks as a Construction Aggregates, District Tharparkar, Sindh Province, Pakistan

Abstract The purpose of this paper is to study the important engineering properties of the volcanic rocks present with the Nagar Parkar Granites located from Sindh University Campus Jamshoro 5 h 44 min (355.3 km) via Hyderabad-Badin Road and 5 h 57 min (323.5 km) via Naukot-Mithi Road and Islamkot, the rocks look suitable for pavement and concrete aggregates. Numbers of standard tests were conducted. Which included; Specific Gravity, Gradation, Soundness, Particle shape and Surface Texture Ab...

Application of Small Scale Wind Turbine for Distributed Electricity Supply and Irrigation Farming A Case Study of Opanda Farm Settlement in Enugu State, Nigeria

Mechanised agriculture has the potential to supply Nigeria with the export needs, it requires to diversify and close its GDP gap. This potential can be actualised if the rural agricultural farmers adopted the use of mechanised irrigation farming techniques. The wind is widespread in Nigeria and wind-powered irrigation system is a clean and decentralised alternative for providing rural communities with electricity for meeting domestic and irrigation farming power needs in a sustainable way. In...

Behaviour of Coconut Shell Aggregate (CSA) Concrete at Elevated Temperature

This paper attempts to study the mechanicalbehaviour of coconut shell aggregate (CSA) concretesubjected to elevated temperatures when coconut shell (CS)is used to replace coarse aggregate at 0, 10, 20 and 40% inconcrete. The coconut shell used was obtained by breakingthe shells into smaller sizes of less than 20mm after thefibres were removed. In order to produce control concretesamples with a minimum compressive strength of 15N/mm2at 28 days curing age, mix ratio of 1:2:4 and water-cementrat...

Mechanical Properties of Particleboard Made from Mahogany Leaves Using Gum Arabic as Binder

This paper presents the findings of an investigation into the use of mahogany leaves particles for the production of gumArabic bonded particleboards. Fresh mahogany leaves, air-dried to a target moisture content of 10% were crushed to anaverage particle size of 2mm. Mix ratios of 2:1, 2.5:1, 3:1, and 3.5:1 of gum Arabic to the crushed mahogany leaves byweight of the mahogany leaves were produced respectively. Twenty four (24) particleboards of sizes 200mm length,50mm width, and 6mm thick were...

Performance of Concrete Made with Coconut Shell Ash (CSA) as an Admixture in Acidic Environment

This paper presents the findings of an investigation on the use of coconut shell ash (CSA) as admixture in concrete and its effect on durability performance. The CSA used was obtained by controlled burning of coconut shell in an incinerator to a temperature of 600–650ºC for 3 hours, air cooled, sieved through 75μm sieve and characterized by using X-ray Fluorescence (XRF) analytical method. The compressive and splitting tensile strengths of concrete were investigated at varying CSA additio...

Effect of Coconut Shell Ash (CSA) as an Admixture on the Properties of Cement Paste and Concrete

This paper presents the findings of an investigation on coconut shell ash (CSA) as admixture in cement paste and concrete. The CSA used was obtained by controlled burning of coconut shell in an incinerator to a temperature of between 600–650ºC for 3 hours, air cooled, sieved through 75μm sieve and characterized based on its oxides composition determined using X-ray Fluorescence (XRF) analytical method. The effects of CSA on cement paste were investigated with addition of 0, 2, 4, 6, 8 and...


2446 - 2460 Of 3414 Results