ABSTRACT A working inventory model is developed to incorporate the partial back ordering inventory with references to the back ordering inventory model by Jonah and Chukwu. The re-order point models of maximum expected cost and service level approach were also established. Data, covering the demand, set-up cost, and the Holding cost were obtained from the Champion Breweries Plc, other related data were estimated. These enabled the application of the models to obtain, the review period, ...
ABSTRACT Cardiotocogram based monitoring needs a reliable fuzzy logic system to reduce the incidence of unnecessary medical intervention and fetal injury during child labour, due to a high degree of uncertainty and imprecision. Presently, electronic fetal monitoring is based almost entirely on the Cardiotocogram (CTG), which is a continuous display of the fetal heart rate (FHR) pattern together with the contraction of the womb. Despite the widespread use of the Cardiotocogram, it has li...
Abstract Tolerancing in design stage and machining parameter optimization in manufacturing stage are related problems which have a great impact on overall production economics of a machining operation. Unfortunately, these problems have been viewed separately causing conflicts between design and manufacturing decisions. While a design decision is to attain a certain part tolerance in the manufacturing stage, the manufacturing decision may be more concerned about economical production and prod...
A temperature sensor is a device that reads the temperature of the surrounding and relays the temperature either in degrees Celsius or Kelvin. The LM335 temperature sensor (used in the experiment) gives out the temperature in degrees Celsius. It is calibrated to output the millivolt voltage reading in proportion to its units of measurement i.e. it outputs 10mV/0K. The main objective of the project was to build a temperature sensor circuit using a LM335. As part of the project, it was als...
ABSTRACT In this study, hydrodesulphurization (HDS), hydrodenitrogenation (HDN), hydrodemetallization (HDM), and micro carbon residue (MCR) renoval were investigated using residuum hydrocracking catalysts containing a zeolite component. It to well known that the strong Brønsted acid sites on the external surfaces of zeolite crystals increase the distillate yield and decrease the coke yield obtained when using fluid catalytic cracking (FCC) catalysts. However, comparatively few studies have b...
The purpose of this experiment was to obtain a basic knowledge on digital electronics and in turn set the stage to perform the analysis and design of complex digital electronics circuits. It also served as an opportunity to learn how the motion sensor worked by using it to turn the LED on/off. This was done by examining results that were brought forth after carrying out the experiment. The results were analyzed and observations made in order to draw accurate conclusions from the entire p...
This project is about water level indicator using raspberry pi. In this project we used led to indicate the different levels and the raspberry pi to display were exactly the level is at in terms of percentages. The simple water level indicator will activate an active buzzer which will make a continuous noise when a certain level of water is reached (maximum).
Abstract: This paper presents the application offractal theory, especially fractal dimension to the formation of sawdust particles during operation with four detailed cases, which helps us to understand the distribution of the sawdust particles inhaled by sawmill workers and remove the effect of toxicity on their body quickly. Pattern of formation of sawdust in human lungs and other parts of the body (in fast branching rate) is described with a practical case study in a developing country. A...
ABSTRACT This study was conducted to develop a Power Tiller Operated Rice Combine Harvester (PORCH) for small holder farmers in Tanzania. PORCH can be attached to a power tiller during harvesting operation and detached to give the power tiller a room for other operations. The study aimed at designing, construction and testing performance of PORCH prototype.Design specifications and drawings were developed and prototype was constructed.The performance of PORCH prototype was tested in Lower Mo...
This thesis introduces full filled description for fifth-generation technology, here concentrated on massive MIMO technology in detailed at channel detection. However, channel illustrated carefully, described how to estimate and detect the channel. By using both algorithms least square and minimum mean square error for channel estimation while zero forcing and minimum mean square error for channel detection by analyzing and measure their performance using BER for MIMO 2x2, also it shows...
ABSTRACT Flexible AC Transmission Systems (FACTS) have been conceived to increase the transmissibility of electric power without the necessity of building new transmission iines. An important family of controllers proposed for FACTS are based on high power solidstate switches, such as the gate-tuni-off thyristor (GTO), which is presently rated at 6kV, 6kA. The FACTS controlier operates at the transmission voltage, in the order of 5ûûkV, and it rnust be mted at hundreds of MVA. The research...
Abstract An investigation is presented into the mechanisms governing both the ageing and axial cyclic loading characteristics of displacement piles in silica sands. The thesis considers first the state–of–knowledge regarding the axial capacity of displacement piles in silica sands. Three main areas of uncertainty are identified; the stress regime setup by installation, the mechanisms of ageing that lead to capacity increases with time (set-up), and the effects of axial cyclic loading. Ne...
This research presents a building management system (BMS), which is the key module in order to perform the controlling and automation. The main area of this BMS focuses on switching and controlling of the power input/output, besidethis security. Modern building services systems are an integration of mechanical, electrical and control components. In the world of today, various subsystems in a big building have been traditionally operated separately, each with their own Information Techn...
A full analysis and design theories have been reviewed conducted to determine response of a buried corrugated steel structural plate culvert for four exceptional shapes as; a round pipe, horizontal ellipse, arch andlow profile arch. The select of culverts span, cover, and exceptional live load have been applied and all were have the same value. AASHTO LRFD Method has been used to measure the result of analysis and design by using manual and computer program techniques. Data collected by�...
ABSTRACT Pavement markings are lines drawn on a pavement surface to provide vital information to road users pertaining to lane restrictions and vehicle movements, which if adhered to, results in improved safety and smooth travelling to road users. Pavement markings’ visibility is quantified into a parameter called retroreflectivity, which is a measure of how well the markings can be seen by road users. The importance of the factors affecting pavement markings differs from one publication t...