ABSTRACT Man’s impact on global environment system especially in the area of dust extraction is now at a scale where it is disrupting. These dust extractors varies in major ways. The environmental degradation is, in turn contributing to health threat in this part of the globe. Unfortunately most factories, workshops which suppose to posses these machines for dust extractions a re not having them thereby making dust a very dangerous threat to man. Due to this ugly development it,...
ABSTRACT Bookshelf, a Mechanical arrangement of materials were documents are stored, it could be made with metal or wood. But this one is fabricated with metal. The type of metal used in the fabrication is mild steel and square baluters. The undismountable bookshelf which has five partitions and four compartment under went many process namely, the drawing and the dimensioning of the bookshelf, needed materials, the marking out and cutting of the materials, welding, smoothing and filling of ...
ABSTRACT This machine is meant for sealing and cutting of nylon bag of different sizes. This machine is operated with electrical system. This machine can cut and seal nylon of different sizes. It also comprises of materials as follows: Mechanical and Electrical section Mechanical section include the frame structure, lever and the pedal mechanism. Electrical section include the transformer, Regular and the micro switch. TABLE OF CONTENTS Title Page Letter of Transmittal Release of Page...
ABSTRACT This write up is a detail of the process and formulation of plan for the physical realization of the construction of a refrigerator. It is divided into chapter, which discussed extensively the practical refrigeration cycle with full attention given to design factors, working principle and choice of material. The method used in construction, assembly and arriving at knowing the safety requirements were not left out. TABLE OF CONTENT Title page Letter of Transmitta...
ABSTRACT The design and construction of s refrigerating unit is handled from the knowledge of the working principles of laws of thermodynamics. The size of the containing vessel i.e the case as established to be of 45cm by 32 cm in dimension. The Angle iron mild steel to used in the fabrication and welding. The box case of two layers are fabricated. Plastic (cooler) box is then placed inside the upper part with the other parts of the refrigerator were brought in. they were all fixed onto a...
ABSTRACT The Turbine Mixer was Fabricated at the ________________________ The method of the fabrication of the Turbine Mixer involves a preliminary computation of the dimensions of the standard Turbine in relation to the dimension of the reacting vessel in which they will be used in. making out, cutting out to sizes, rolling/folding, welding, body filling, glass- papering and painting. The total surface area is 10741.5cm2 The first step taken in the fabrication of the said project was t...
ABSTRACT The main aim of any electric power supply in the world is to provide uninterrupted power supply at all times to all its consumers. Although, in developing countries, the electric power generated to meet the demands of the growing consumers of electricity is insufficient, hence power instability and outage. Power instability or outage in general does not promote development in the public and private sector. The investors do not feel secure to come into a country with constant or frequ...
TABLE OF CONTENT Definition of Bearing Various types of Bearing and Features Classification of bearing Uses of types of bearing Criteria for bearing selectio DEFINITION OF BEARING A bearing is a device to allow constrained relative motion between two or more parts, typically rotation or linear movement. Bearings may be classified broadly according to the motions they allow and according to their principle of operation as well as by the directions of applied loads they can handle.
TABLE OF CONTENT Introduction Brake System Types of Brake System Applications of Brake System Performance Parameters of Brake System INTRODUCTION A brake is a device which inhibits motion. Its opposite component is a clutch. The rest of this article is dedicated to various types of vehicular brakes. Most commonly brakes use friction to convert kinetic energy into heat, though other methods of energy conversion may be employed. For example regenerative braking converts much of the energy to e...
TABLE OF CONTENT Stress Concentration -Causes -Prevention -Examples -Determination of the Maximum Stress at the Crack Tip Stress Concentration Factor -Determination of Stress Concentration Factor -Stress Concentration factor for cracks -Stress Concentration factor Calculations Types of Loading
ABSTRACT This write up focuses attention on a detailed report and account on the process of construction and formulation of plan for the actual and physical realization of the construction of the project work captioned fabrication and construction of a mobile cooling system. The report is therefore divided into chapters and each chapter discussed extensively such that an illiterate refrigerator mechanic who read and comprehends the report can easily carryout the construction of refrigerator...
ABSTRACT It is well known fact that there are numerous problems inherent in the Nigeria Personal Income Tax System. With the present economy, a lot of problem emanated from the assessment, collection and management of personal income tax. Personal income tax is a source of revenue to the government and, therefore, must be saved from the setbacks. Since we are not in an ideal world, the problems associated with personal income tax may not be completely eradicated but can be reduced to a manag...
CERTIFICATIONi DECLARATION AND COPYRIGTHii ABSTRACTiii Dedicationiv ACKNOWLEDGEMENTv Table of Contentsvi LIST OF TABLESix CHAPTER ONE1 1.1 Introduction1 1.2 Motivation statement3 1.3 Problem statement5 1.4 Objective of the study6 1.4.1 Specific objectives6 1.4.2 Research question7 1.5 Scope of the project:7 1.6 Expected outcome of the project8 CHAPTER TWO9 2.0 LITERATURE REVIEW9 2.1 Introduction9 2.1.1 THE POSSIBILITY OF ENGINEERING CODE OF CONDUCT10 2.1.2 INTERPRETING A CODE OF CONDUCT1...
CHAPTER ONE INTRODUCTION 1.1 BACKGROUND OF STUDY The continuous increase in food demand requires a rapid improvement in food production technologies. Food insecurity is a major challenge in developing countries. In a country like Nigeria where the economy is mainly not agriculture based, use of technology to improve on yields is paramount. Agriculture in Nigeria is mainly rain fed. Global warming has led to climate changing thus rendering the rain fed agricultural system...
light sensitive alerm