TABLE OF CONTENT TITLE PAGE DEDICATION ACKNOWLEDGEMENT ABSTRACT TABLE OF CONTENT CHAPTER 1 INTRODUCTION 1.1 BACKGROUND 1.2 NATURAL GAS AND THE NIGERIAN ECONOMY 1.3 OBJECTIVE 1.4 PROBLEM STATEMENT CHAPTER II LITERATURE REVIEW 2.1 GAS UTILISATION IN NIGERIA 2.2 LIQUEFIED NATURAL GAS 2.3 FISCHER TROPSCH GAS TO LIQUID TECHNOLOGY 2.3.1 SYNGAS PRODUCTION 2.3.2 FISCHER-TROPSCH PROCESS 2.3.3 PRODUCT UPGRADE 2.4 RISK PROFILE OF LNG AND FT-GTL...
ABSTRACT Demulsification (emulsion breaking) is necessary in many practical applications such as the petroleum industry, painting and waste-water treatment in environmental technology. Chemical demulsification is the most widely applied method of treating water-in-crude oil emulsions and involves the use of chemical additives to accelerate the emulsion breaking process. The effect of chemical demulsification operations on the stability and properties of water-in-crude oil emulsion...
ABSTRACT Demulsification (emulsion breaking) is necessary in many practical applications such as the petroleum industry, painting and waste-water treatment in environmental technology. Chemical demulsification is the most widely applied method of treating water-in-crude oil emulsions and involves the use of chemical additives to accelerate the emulsion breaking process. The effect of chemical demulsification operations on the stability and properties of water-in-crude oil emulsions was assess...
ABSTRACT Demulsification (emulsion breaking) is necessary in many practical applications such as the petroleum industry, painting and waste-water treatment in environmental technology. Chemical demulsification is the most widely applied method of treating water-in-crude oil emulsions and involves the use of chemical additives to accelerate the emulsion breaking process. The effect of chemical demulsification operations on the stability and properties of water-in-crude oil emulsions was as...
television is widely viewed as a powerful medium .it is therefore necessary to find out the effects it has on children and how it contibutes to the socialization of children
TABLE OF CONTENTS Content Page Title Page ...
ABSTRACT A common misconception about stainless steel is that it is not affected by corrosion. Although one of the main reasons why stainless steels are used is corrosion resistance, they do in fact suffer from certain types of corrosion in some environments and one of such types is crevice corrosion. Crevice corrosion is normally a consequence of a galvanic cell generated in specific areas with restricted flux. Crevice corrosion is a form of localized corrosion in which a metal in contact ...
ABSTRACT Cloning of Computer System is very essential in a computing area. This project focuses more on how computer system could be coupled and maintained effectively and efficiently without any fault during assembling of the system. Throughout this project we shall focus on each and every components needed for assembling and also there functions. The main reason why people go for assembling of system instead of buying a new system is to allow them to have good and satisfactory q...
This is a paper about generating sequences with matlab A digital signal processor (DSP) is a specialized microprocessor (or a SIP block), with its architecture optimized for the operational needs of digital signal processing. The goal of DSPs is usually to measure, filter and/or compress continuous real-world analog signals.1.1Generation of Discrete Time SequencesProject 1.1: Delayed Unit Sample SequenceA unit sample sequence is a sequence that has a value of one (1) at n=0, and a value of ze...
The purpose of EOR is to increase oil production, primarily through an increase in temperature, pressure, or an enhancement of the oil’s ability to flow through the reservoir. This study focuses on which chemicals available to flow through the reservoir. This study focuses on which chemicals available in Nigeria are best suited for EOR in Nigeria. The challenge of EOR is that the remaining is located in regions of the reservoir that are difficult to access, and the oil is held in the pores ...
Literature Review More peer-reviewed scientific studies on large-scale solar energy developments and operations are needed to adequately assess their impact (: solar electricity handbook September 2, 2013 ) Table of Contents i.Title Page……………………………………………………………………………… 1 ii.Table of Contents………………………………………………………………… 2 iii.Problem Statement………………………………………...
ABSTRACT Blender is an electric machine for size reducing soft food or liquid mixture. Blender is some time called liquidizer consists of a glass jar or jug containing a steel blade assembly at the base driven by a small electric motor. Construction of blender was done based on the principle of size of reduction using electric motor as the major driver force. During the construction of blender, we adopted different stages which includes: The production of preliminary drawings with detail...
THE WHOLE PROPOSAL
ABSTRACT This research is centered on the design and fabrication of copula furnace and atomizer for the production aluminium powder metal with the available material.0.4kg of refined coke was chosen as the basis for material and energy balance calculations and the design calculations performed from whose values are used to produce the design drawings.Mild steel was used for the internal linings of the furnace casing while other materials were selected based on functionality, durability, cost ...
ABSTRACT Waste and residuals are undeniably part of the human society. The accumulation of these materials and the “throw away” philosophy results in many environmental and health issues and safety hazard problems prevent sustainable development in terms of resource recovery and recycling of waste materials. The carbon sources in the waste can be converted to energy (electricity) using different technologies including collecting and converting current landfill gases, wet or dry anaerobic ...