Abstract: Before disposal of any metallurgical waste to the environment, it is the responsibility of mining institutes to adhere to the permissible metal content limits. Base metals, especially iron and copper, have adverse effects of reducing the soil pH and excessive concentrations of these in the disposed waste may result in soil pollution and toxicity, with adverse effects on plant growth and animal health. Copper slag is a metallurgical waste that is disposed by way of stockpiling at de...
Abstract: The research presents a comparative study on the effectiveness of blending plant based natural coagulants (Cactus Opuntia and Moringa Oleifera extracts) and a synthetic coagulant (aluminium sulphate or alum) in treatment of raw water. The low production rates of natural coagulants has derailed their commercialization this has driven the idea of blending synthetic coagulants which is envisaged to be the more appropriate means of application in this study. To measure the effectivenes...
Abstract: In this review, the role of surface modification of nanoparticles to enhance their performance as adsorbents was explored. Performance was assessed by comparisons on adsorption capacities of differently modified nanoparticles (silica, iron, and alumina based nanoparticles) on different heavy metal ions (Cu, Cd, Co, Ni, Pb, As, Cr, Zn, Mn, and Hg). A comparison of pure and modified materials revealed that the modified materials gave superior adsorption capacities. A close relationsh...
Abstract: The disposal of sludge processes accounts for 60% of the total operation and 40% of total emissions of greenhouse gas from wastewater treatment plants operations. Moreover, sludge contains pathogenic microorganisms, organics, inorganics, trace metals and emerging micropollutants, which can be a public health menace. To comply with the Environmental Protection Agency standards, sludge must be stabilized and detoxified before being disposed or reused. This study focuses on the use of...
Abstract: Surface structure determines the performance of materials in service. Enhancing the surface topography of materials with a refractory ceramic coating such as Titanium carbide has gained unprecedented development of recent due to the increase in applications of these functionally graded materials. Radio frequency (RF) magnetron sputtering exhibits a lot of potential in depositing and growing thin film thin. One of the major advantages of RF magnetron sputtering is the ability to be ...
Abstract: In a rural part of many developing countries including Ethiopia; it is difficult to use modern incubator due to shortage of electricity and high initial capital as well as operating cost. Therefore, this experiment was conducted at Haramaya University poultry farm, Eastern Ethiopia to develop a solar powered incubator and compare its performance and profitability with the modern electric incubator. Solar powered incubator was developed and its performance was compared with modern e...
Abstract: In this article, alternative forms of optimizing the milling efficiency of a laboratory scale ball mill by varying the grinding media size distribution and the feed material particle size distribution were investigated. Silica ore was used as the test material. The experimental parameters that were kept constant in this investigation was the grinding media filling, powder filling and the mill rotational speed. The data obtained from these batch tests was then analyzed using a model...
Abstract: The mobile demands and future business context are anticipated to be resolved by the fifth-generation (5G) of mobile communication systems. It is expected to provide an utterly mobile device, connected society, and support the demanding services of various use cases (UCs). This is intended to meet the demand requirement by providing services at tens of Gbps in terms of data rates, higher mobility range, lower latencies, and massive connectivity density devices per square kilometer....
Abstract: In this work, a small activation chamber was specially designed to facilitate the irradiation of selected samples with secondary neutrons behind a radionuclide production target in the vertical-beam target station (VBTS) at iThemba LABS. The main aim was to assay the radionuclides formed in the samples, with a special interest in those of medical importance. The experiment was performed simultaneously with a routine radionuclide production run, during which the target was bombarded...
Abstract: Long Range (LoRa) is a leading low power wide area network under the IEEE802.15.4 designation. The technology has been used extensively in wireless sensor network applications (WSN) and studies are shifting to investigate the technology’s viability when used for navigation. However, the problem of planning and deployment of LoRa in navigation as well as the repeatable accuracy of such a system based on known timing errors has not been done. The first chapter of this thesis prese...
Abstract: The field of microelectronics experienced a huge shift from the traditional planar MOSFET to 3D multi-gated structures, most noticeable being the FinFET. FinFET is regarded the most favourable for progressing CMOS downscalling in the nanometer scale due to its ability to suppress short channel effects due to its better gate control, enabling it to achieve performance of high quality and low power. The fin dimen sions play a huge role in the design of a FinFET. Looking at the gadget...
Abstract: The main issue associated with groundwater supply in Botswana are the rate of its replenishment relative to its extraction rate and quality. This study aims to identify the possible causes and effects of groundwater decline at the Dukwi Wellfield. Specifically, it aims to investigate the contributing variables for groundwater decline at the wellfield area; the trend and significance of groundwater level decline using the linear trend model; the influence of groundwater decline...
This research work delves into a comparative analysis of Perovskite solar cells crafted using different antisolvents, namely DMF, DMSO/DMF, and TOL/DMF. The investigation focused on assessing their structural and optical properties, as well as their solar cell efficiency and stability. Notably, the perovskite layer formed with DMF displayed numerous pinholes, while the use of TOL/DMF as a mixed solvent yielded a pinhole-free layer. Spectral analysis revealed heightened light absorption in the...
This paper presents a comprehensive analysis of power flow and fault scenarios in a complex power system configuration consisting of generators, transformers, transmission lines, buses, and loads. Utilizing MATLAB's Power System Analysis Toolbox (PSAT) and employing the Newton-Rhapson Method, power flow calculations were conducted to assess system performance under normal operating conditions. Subsequently, fault analyses, including Double Line-To-Ground Fault (DLG) and Three-Phase Fault (3φ...
This paper presents a comprehensive analysis of power flow and fault scenarios in a complex power system configuration consisting of generators, transformers, transmission lines, buses, and loads. Utilizing MATLAB's Power System Analysis Toolbox (PSAT) and employing the Newton-Rhapson Method, power flow calculations were conducted to assess system performance under normal operating conditions. Subsequently, fault analyses, including Double Line-To-Ground Fault (DLG) and Three-Phase Fault (3φ...