Engineering

Engineering Research Papers/Topics

Assessment of Different Point Water Sources in Kyakaliba and So Determine the Best Water Source for Kyaliba Rural Developing Community, Case Study in Hoima District

ABSTRACT Kyakaliba is a small village nestled in Buntanjwa Sub-county two miles away from Hoima Town in the Hoima district in Western Uganda. The population is 500 people (Source: Population Census; 2014) which is growing fast as a result of the Oil sprouting economic activity in the district. Currently, the available water sources are 3 Shallow wells, a spring, and Rainwater harvest but of the three wells, only one works with an issue of having too much Iron in the water, the spring runs dr...

Design and Implementation of an Intelligent Voice Controlled Wheel Chair

Abstract This project report describes the design and implementation of an Intelligent Voice Controlled Wheel Chair for disabled people. The model utilizes an Arduino Voice Recognition Module interfaced with a high-level 8-Mt AVR Microcontroller to control motorized movements using voice commands. The model provides both a convenient and non-technical solution to navigate in a disabled home for even the critically crippled who can talk. To avoid uncontrolled collisions, the wheelchair include...

Design and Implementation of Free Wireless Intercom System (Case Study: Kampala International University)

ABSTRACT In modern technology, wireless communication is widespread and it started to be used in everyday life, for example, Wireless phone chargers, home automation systems, etc. widely use wireless communication. People want smart systems to make their life easy, and I want to discard the cables that limit our mobility. The purpose of this project is to design and implement a free intercom system that uses WIFI in p2p (Peer-to-Peer) or WLAN (Wireless Local Area Network) as a means of commu...

Design and Implementation of a Four Dimensional Automatic Accident Avoidance System

ABSTRACT  This report contains five chapters, in chapter one, as an introductory part of this project report, contained in chapter, we first define what accident is, the background of the study, that is to say, how the problem started or what prompted us to carry out the project. The problem statement, this is about the challenges we are solving, the main objective, specific objectives, significance of the study, and scope of the study. In chapter two, this chapter covers the literature revi...

Design of A Two Storeyed Classroom Block for Aripea Secondary School

ABSTRACT This is my final year project report for the award of a Bachelor’s degree in civil engineering at Kampala International University that presents the structural Design of a two storied classroom block for Aripea secondary school. This report comprises of three chapters, highlighting the order in which the design was carried out. A detailed introduction of the project that was considered for the design; which includes the background and introduction of both the project and the site....

Design of A Sanitary Landfill for Kapchorwa Central Division.

ABSTRACT The study was to design a sanitary landfill in Kapchorwa central division to curb the problem of improper solid waste disposal. According to the study that was conducted within the municipality; it was found out that the municipality majorly had four main sources at which the solid wastes are generated; Residential wastes, Commercial wastes and Institutional wastes Qualitative data was collected to know the characteristics of solid wastes whereas quantitative data was used to measur...

Assessing Causes of Drinking Water Source Contamination in Kampala City: A Case Study of Katwe and Kisenyi Parishes Final Year Project Report

ABSTRACT Water pollution is a serious problem for the entire world. It threatens the health and well being of humans, plants, and animals. As the world became more industrial and smaller due to communications and trade, accidental and purposive hazardous dumping have contributed to the problem of sources of water pollution. All water pollution is dangerous to the health of living organisms, but springs and borehole pollution can be especially detrimental to the health of humans. Springs and ...

IoT in Home Energy Management

This paper is a detailed study of IoT devices and effectively using them for Energy Management at our Homes. IoT Energy Management is an operation that involves organizing and administration of energy consumption patterns in numerous industries. As a part of the Smart System, Home Energy Management System (HEMS) is becoming increasingly essential, because energy consumption of urban residential sector accounts for a noteworthy amount of total energy consumption. However, a conventional HEMS h...

Design and Implementation of an Android Based Automatic Sector Antenna Positioning Using Atmega328p. (Case Study: Namuyenje Site in Mokono)

ABSTRACT.  To achieve most accurate coverage area results during installations of sector antennas, the technical team must create a coverage map for each of the sectors basing on the provided coverage values. The technical team uses these values to make manual position adjustments of sector antennas. Manual antenna adjustments are sometimes risky in a way that unexpected accidents usually occur that even result into death. To overcome such scenarios, an android based sector Antenna positioni...

A Study to Investigate into The Application of Resource Planning Techniques by Small and Medium Sized Contractors in Uganda.

CHAPTER ONE:  INTRODUCTION 1.1 Background Uganda has got many Small and Medium Sized Contractors (SMSC) engaged in the construction business. Some of these (SMSC) change business name and scope within a short time because of the competitiveness pressures within the construction industry. Little is achieved by these struggling SMSC due to the level of development of the local construction industry (LCI). Recent studies show that the Local Construction Industry is not very competitive, undeve...

Derivation of Polynomial Functions for The Prediction of Critical Axial Forces in Bridge Trusses.

ABSTRACT This study presents the derivation of polynomial functions for the prediction of critical axial forces in bridge trusses. Four different bridge trusses were considered in this study, three of which are statically determinate while one is statically indeterminate. These trusses at different height to span (aspect) ratios were tested for critical axial forces under the same conditions. The graphs of their critical axial forces against aspect ratios were plotted and this led to the find...

Determining The Structural Characteristics of Chikoko Mud-Cement Concrete Using Scheffe’s and Osadebe’s Techniques

ABSTRACT This study investigated the structural characteristics of chikoko mud-cement concrete. The structural characteristics of chikoko mud-cement concrete investigated were compressive strength, flexural strength, shear strength and split tensile strength while the elastic properties investigated were static modulus of elasticity, poisson’s ratio and shear modulus. The water absorption of chikoko mud-cement concrete as a reflection of concrete durability was also investigated. Ninety (9...

Development and Evaluation of the Optical Properties of Optical Glass Produced from Otamiri Silica Sand

ABSTRACT This work investigates the optical properties of glass prepared using Otamiri Silica sand mixed with analytical grade oxides as a function of their composition. Three batches were prepared with Phosphorus as the main variable of the SiO2-Na2OB2O3-CaO-ZnO glass system. The glass was melted in a ceramic crucible with a lid and the glasses melted after two hours of firing in a monolithic charcoal furnace. The effect of varying SiO2 and P2O5 on optical properties was determined using a ...

Development and Performance Analysis of Compressed Natural Gas as Transport Fuel for Automobiles in Nigeria

ABSTRACT Development and performance analysis of compressed natural gas (CNG) as a transportation fuel for automobiles in Nigeria are presented. The study involved compositional analysis of natural gas obtained from the product sales point at a treatment plant about 10km off the Port Harcourt-Onitsha route chosen to ensure standard sales gas specifications, design of the gas pipeline network and the refuelling stations requirement and locations. Using field investigations and developed physi...

Development of A Generalised Solution for The Performance Measures of Queuing Systems

ABSTRACT This study developed computer software with the capacity to provide a generalized solution to queuing problems involving laborious, time consuming and complex mathematical approach of evaluating the performance measures of queuing systems when it was applied in the analysis of the six (6) fundamental performance measures of thirty (30) different organizations representing the six (6) queuing systems; the result was compared with that of mathematical computations and 97.22% complianc...


466 - 480 Of 3355 Results