ABSTRACT This study is on the determination of the Compressive Strength of Palm Kernel Shell Concrete. The effect of percentage replacements (0, 25, 50, 75 and 100%) of crushed granite with palm kernel shell on density and compressive strength of concrete is presented. Concrete cube specimens of mix 1:2:4 were prepared with water-cement ratio of 0.6. The cubes (150mm×150mm×150mm) were cured using water-submerged curing until testing ages of 7, 14, 21 and 28 days when their densities and co...
ABSTRACT In this research, Social Network Web Application (SNWA) was developed and tailored for a specific use; community development in the Niger Delta region of Nigeria. In the SNWA development, preliminary context analysis was conducted to capture contextual information on community development challenges in the Niger Delta and the readiness of the target local community to adopt web-based solution to the identified challenges. Subsequently, User-Centered Requirement Engineering, User-Cen...
Abstract Design of a Robust Electronic Internal Temperature Controller for Petroleum Distillation is presented in this Thesis. During unstable weather conditions, there is a noticeable drop in the distillation internal column temperature. An extreme and frustrating case of this occurs during rainfall and at night when the fractional distillation column external temperature drops, greatly affecting the internal. Consequently, it becomes difficult to maintain a stable and optimum internal temp...
ABSTRACT Communication Protocols are the key tools for data transmission; most of them were defined for asynchronous data transport. Underpinning the Internet is the Internet Protocol (IP), which, has offered an ideal pathway for general Information Technology convergence with its capability of carrying large variety of signals (audio, control, voice, video, data, etc.). This thesis is on “the Design and Simulation of Audio Over IP (AoIP) frequency modulated broadcast studio system”. Usi...
Abstract The design, construction and performance test of a parabolic solar cooker for domestic use are presented. The simple experimental parabolic solar cooker, made of locally available materials, consists of a parabolic dish of thickness 0.3mm, adjustable mechanism, pot, pot holder, base support and a reflecting glass surface. The concave surface of the dish was lagged with reflective glasses which serve as a reflecting surface. Commercially available (3mm) thick glass is used as glazing...
ABSTRACT In this project work, a hybrid cloud system using StackOps Distro Community Edition was designed and implemented. The Electrical and Electronic Engineering Department of the Federal University of Technology, Owerri was used as a case study. This is essential as there is greater need for readily available and on-the-go Information and Communication Technology services. Ubiquitous access to data, files, documents, project work and the like are vital in all spheres of life, and especia...
ABSTRACT The purpose of this project was to design and develop a Computer Based Testing (CBT) system in order to facilitate the process of conducting e-examinations especially in tertiary institutions. There is a growing need to find an easy and effective way to carryout continuous assessments for the increasing population of students. The CBT system will afford instructors the opportunity to assign different weights to the multiple choice questions. The method adopted was a client/server ba...
ABSTRACT An evaporative cooling system was developed with locally available materials. The system was aimed at providing lower temperature and higher relative humidity necessary for extending the shelf life of fruits and vegetables. The performance of the cooler was evaluated in terms of temperature drop, humidity gain, cooling efficiency and quality assessment of the stored products. Two categories of test were carried out on the cooler with the chosen absorbent materials: the no-load test ...
ABSTRACT An indirect, natural convection solar-assisted charcoal smoking system was designed and fabricated in one of the host communities of the Federal University of Technology, Owerri where most of the fish farmers and processors adopt the conventional method of drying fishes, that is, using firewood. This method which works well during the dry period of the year is very inconvenient during the rainy season. Given the excessive heat generated by firewood and its resultant effect on the pr...
Abstract Consumers’ complaints of estimated bills from the Utility have risen to an alarming extent in recent years. On the other hand, Utility incurs huge losses attributing it to electric energy consumption theft among consumers. These complaints by the utility and the consumer led to the quest for a system that in addition to recording energy consumption data, will be able to compute and report the data to the Utility remotely. This work proposes the implementation of smart meter which ...
ABSTRACT This project work covers the design and construction of a robotic arm mechanically capable of 5 Degrees of Freedom. It solves the problem of automatically detecting and picking up objects placed within distances of 10-30cm round the robot base platform. It does this by using a simplified forward and inverse kinematic relation modeled in two dimensional robot workspace. The work does not cover the more general case, of an n-linked (n>2) robotic arm working within a three dimensional ...
ABSTRACT This project presents a 40A maximum power point tracking solar charge controller. The MPPT charge controller tries to keep the voltage and the power stable. The MPPT charge controller will harvest more power from the solar array – it will adjust its input voltage to harvest the maximum power from the solar array and then transform this power to supply the varying voltage requirement of the battery plus load. An MPPT charge controller is an electronic DC to DC converter that optimi...
Abstract Safety is crucial in oil and gas industries, it is normal practice to collect incident reports daily. The volume of such reports is always very huge, as a result, the interpretation poses a great challenge. Consequently, there is an urgent need for techniques that can intelligently assist in transforming such vast amount of data into useful information and knowledge. Data mining is part of the knowledge discovery process that offers ways of extracting non-trivial, previously unknown...
ABSTRACT The problem of epileptic power supply and its consequences in the developing countries is a generally known issue. Worst still, the hope that it will be addressed with the deregulation of electricity Industries in recent time are being dashed by flight to top class investors due to its poor implementation. There is a need to provide multiple sources of power and automatic mechanisms for switching from one source to another. This is achieved in this work where quadruple power supply ...
ABSTRACT Comparative economic analysis of the use of compressed natural gas (CNG) and the use of AGO for power generation was presented. The data for costs of constructing and running CNG-powered vehicles were obtained for the study. Separate economic analyses of running the CNG-powered vehicles and running AGO vehicles were performed. The initial capital cost for CNG project amounted to N4.31 million and that for diesel was N3.60 million while the annual operating cost for CNG is N1.47 mill...