ABSTRACT New equations for bilinear, formation linear and pseudo-radial flow regimes in an infinite commingled fractured multilayered reservoir have been developed. The equations have been extended to Tiab’s Direct Synthesis Technique that makes it easy to estimate the individual layer properties without type curve matching. Regardless of the flow regime, the rate normalized pressure derivative with respect to the appropriate time function has been found analytically to be constant, which ...
ABSTRACT The increasing rate of cancer patients worldwide, and especially Africa has led to numerous efforts to battle it. One approach to this has been localized drug delivery to reduce the quantity of drugs needed for therapeutic effect. Poly-di-methyl-siloxane (PDMS) is an elastomer with much focus on it as a microfluidic device. PDMS is one polymer of choice for localized drug delivery due to its biocompatibility, transparency, and ease of fabrication. However, its highly hydrophobic nat...
ABSTRACT Increasing oil recovery has been one of the issues enlisted for attention in oil producing countries around the world for past decades. So many forms of oil recovery techniques have been considered; infill drilling of new wells, production and injection control, pressure control, water flooding and other methods of Enhanced Oil Recovery (EOR), most of which have been implemented in other parts of the world. Nigeria as an oil producing country has not taken interest in EOR techniques ...
ABSTRACT The use of horizontal wells with zonal isolations is a common completion practice in the oil and gas industry to check for very significant production challenges such as wellbore damage/skin, early water breakthrough and gas coning, rapid pressure depletion, dampened recovery efficiency and overall well productivity. Notwithstanding, the use of zonal isolators invariably alters the transient pressure response of horizontal wells. In this research, the use of well test analysis has b...
Abstract This work presents the results of experimental and theoretical studies of the biodegradation of polyethylene, recycling of polyethylene into strong and tough earth-based composite building materials and the statistical distribution and particle size analysis of the polyethylene composites. Serratia marcescens subsp. marcescens and its supernatants are able to biodegrade linear low density polyethylene (LLDPE). The results show that the cell-free extracts degrade LLDPE faster than th...
ABSTRACT A major drawback of directional and horizontal well drilling is the numerous complex computations required to be done while planning a well. These computations are very stressful and time consuming especially when done manually. One of the objectives of this study was to develop a user friendly Excel Spreadsheet program that would make the computations of these well trajectory parameters easier, faster and accurate. An Excel Spreadsheet program was developed employing the Minimum Cu...
ABSTRACT This study investigated transient flow response of heavy oil that exhibit Bingham fluid characteristics. Four wellbore conditions in naturally fractured reservoirs were considered which include horizontal well, hydraulically fractured well, partially penetrating and fully penetrating vertical wells. Physical models were established and corresponding mathematical models were presented taking cognisance of minimum threshold pressure,𝜆𝐵. The model was solved analytically by succe...
ABSTRACT Waterflooding is one of the most common secondary recovery mechanisms available for improving oil recovery from known accumulations. Due to the limitation of available water for injection, there's a need to optimize the use of this limited resource. To this end, a methodology has been developed to allocate injection water to more efficient wells than to those of lower efficiency. Streamline simulation is a complementary tool to conventional finite difference simulation, provides a q...
Abstract Bioinspired design involves the use of concepts observed in natural biological materials in engineering design. The hope is that the leveraging of biological materials in the engineering domain can lead to many technological innovations and novel products. This work presents the initial material characterization of kinixys erosa tortoise shell using a combination of xray diffraction, optical/scanning electron microscopy and micro-mechanical testing. The results were used in the anal...
ABSTRACT Transient analysis and performance prediction of passive cooling of buildings using long wave nocturnal radiation in Owerri, Nigeria are presented. Owerri is a typical urban area in southeastern Nigeria lying between latitude 5° 4' and 6° 3' N and longitude 6° 15'and 7° 34' E. The system modeled consists of the room of a building with a radiator panel attached to its roof, water storage tank located inside the room, pump to circulate water through the radiator panel at night and...
ABSTRACT Pipes that make up oil and gas wells are not vertical but could be inclined at any angle between vertical and the horizontal which is a significant technology of modern drillingExperimental data on time varying liquid holdup for and pipe inclination angles were analyzed and interpreted. Parameters such as void fraction, slug frequency, lengths of liquid slug, Taylor bubble and slug unit, structure velocity and pressure drop were calculated from the experimental data. It was observed...
ABSTRACT The recent power sector reform in Nigeria has thrown up enormous challenges in this sector, ranging from the construction of more power stations, construction of new transmission lines and substations. The existing network of 8-plants and 26 bus-bars expanded to the proposed network of 16 generating plants with 49 bus-bars. This network expansion requires reappraisal for power evacuation capabilities, relay systems setting and establishment of stability margins for adverse system f...
ABSTRACT The use of local clays for the production of porcelain pin insulators was investigated. Clays from Awo-omama, Ibere and Nsu were used for the study. Test samples were made by varying the compositions of feldspar and quartz needed to form a mouldable plastic body with each clay. The following properties were determined: electrical resistivity, apparent porosity, water absorption, bulk density, linear shrinkage as well as crystalline phases produced after firing. This characterizat...
ABSTRACT Cuttings transportation during in non-vertical boreholes is necessary for oil and gas wells. Adequate cuttings removal from a well in drilling is critical for cost-effective drilling as high annular cuttings buildup often leads to high risk of stuck pipe, reduced rate of penetration and other impediments to standard drilling and completion procedures. This study investigates how rheological parameters influence the removal of cuttings in non-vertical boreholes. It contributes to wor...
ABSTRACT Organolead trihalide perovskite solar cells have shown success as light absorbers in photovoltaic cells due to their efficiency increasing from 3.5% to over 20% within only five years. However, pinhole formation and incomplete coverage of solution-processed perovskite film results in increased current leakage, reducing efficiency. Hence the surface morphology of perovskite film is important for high performance of perovskite solar cells. Here the morphology is carefully controlled b...