Engineering

Research Papers/Topics Engineering

Inhibition Of The Corrosion Of Mild Steel In Acidic Environment Using Azadirachta Indica (Neem) Leaf Extract As Inhibitor

ABSTRACT The inhibition of corrosion of mild steel by Azadirachta indica leaf extract in acidic environments of HCl and HNO3 from pH1 to pH6 has been investigated using the weight loss technique. The Azadirachta indica leaf extract is the inhibitor and the mild steel used was in the form of coupons. The investigations were carried out at ambient temperature. The optimum concentration of the extract used for the experimentation was obtained by soaking 200g of ground fresh Azadirachta indica l...

Implementation Of Data Logging With Wireless Sensor Networks

ABSTRACT The goal of this project was to design a data logging interface using wireless network principle in order to facilitate the process of monitoring physical parameters such as temperature, pressure, humidity, e.tc in the environment. There is a growing desire to find an efficient and cost effective means to monitor these physical parameters, especially at home and industries. The absence of a means to monitor these quantities in an environment has led to so many inadequacies. The meth...

Gsm Mobile App: A Solution To The Challenges Of The Current Voting System In Tertiary Institutions In Nigeria

ABSTRACT The word “vote” means to choose from a list, to elect or to determine. The main goal of voting (in a scenario involving the students of a given tertiary institution), is to come up with student-leaders of the students’ choice.Most tertiary institutions, FUTO not an exception have problems when it comes to voting. Some of the problems involved include rigging votes during election, insecure or inaccessible polling arena, inexperienced personnel and so on because voting in these...

Factors Affecting The Colour Yield Of An Acid Dye On Nylon Fabric

ABSTRACT The factors that affect the colour yield of an acid dye on nylon fabric were investigated at a constant temperature of 500C, usingC.I. Acid Yellow 23,with citric acid and sodium chloride as auxiliaries. It was observed from the absorbance results that the colour yield of C.I. Acid Yellow 23 improved with increase in time of dyeing, while the absence or increase beyond 1% (acid) and 5% (salt) reduced the colour yield of the acid dye on the nylon fabric. Also, at a constant dyeing tim...

Experimental Investigation Of Upflow Bioreactors With Central Substrate Dispenser

ABSTRACT Experimental investigation of anaerobic digestion of the organic fraction of municipal solid waste (MSW) in an upflow bioreactor with central substrate dispenser (UBCSD) is presented. The UBCSD consists of two similar size bioreactors joined by a central substrate dispenser (CSD). The UBCSD is a component of an integrated system of bioreactors also containing the upflow anaerobic sludge blanket (UASB) reactor and the continuous stirred tank reactor (CSTR), assembled systematically t...

Pedagogical Challenges Facing The Teaching Of Business Studies And Impact On Students’ Achievement In Secondary Schools In Nyandarua County- Kenya

ABSTRACT The teaching of Business Studies, overtime has been recording below average performance in the national examinations all over the world, Kenya inclusive. Studies carried out in some other part of the world clearly document the reasons for this and the measures that have been undertaken to alleviate this problem. This study sought to investigate the pedagogical challenges facing the teaching of Business Studies subject and their impact on students’ achievements in national exa...

Effect Of Zn Doping On In2se3 Thin Films For Phase Change Random Access Memory (Pram) Applications

Abstract Phase Change Memory is one of the most promising concepts for the future generations of Non Volatile Memories. Extensive work is nowadays performed on the Phase Change Materials to optimize the cell properties for specific applications. In particular, for the embedded memory market, it is desirable to reduce the writing current while raising data retention capability. In2Se3 has shown remarkable characteristics for phase change random access memory (PRAM) applications. Among the rema...

Characterization Of Cuxny And Cdo:Al Thin Films For Solar Cell Applications

BSTRACT A solar cell is a device that converts light energy into electricity by photovoltaic effect. The photovoltaic effect refers to photons of light exciting electrons into a higher state of energy, allowing them to act as charge careers for an electric current. Materials presently used for solar cell fabrication include silicon, gallium arsenide (GaAs) among others. However, these materials are expensive and not readily available. As a result, there is need to search for alternative mater...

Fabrication And Characterization Of Al/Znse Thin Film Schottky Diode

ABSTRACT The desire for smaller, more efficient and faster semiconductor devices has made the design of the Schottky devices, material preparation and characterization very vital. There is little research if any on the effect of Schottky contact geometry on I-V characteristics. In this study various circular and rectangular thin filmed Al/ZnSe Schottky diodes were designed by varying; the shape, area of the Schottky contact, the inter electrode distance and thickness of the thin film ZnSe. F...

Effect of Surface Passivation on Doped Tin (IV) Oxide Thin Films for Gas Sensing Applications

ABSTRACT In this work, SnO2 thin films were deposited on a glass substrate by spray pyrolysis technique using aqueous solution of tin (IV) chloride (SnCl4.5H2O) dissolved in ethanol. Different types of thin films such as SnO2, F: SnO2, Pd: SnO2 and Pd-F: SnO2 were deposited at a substrate temperature of 450 0C. Post deposition treatment: annealing and passivation were performed in a tube furnace at 450 0C. The samples, both as prepared and treated, were thereafter characterized by optical and...

Design And Fabrication Of A Portable Spectrometer To Investigate Optical Properties Of Thin Films

ABSTRACT Optical spectroscopy is a non-destructive and contactless method for characterizing optical and electrical properties of thin films; reflectance, transmittance, refractive index, permittivity and band gap. These properties determine the application of a thin film as a polarizer, laser, solar cell or photodiode among others. To measure accurately optical properties of thin films, the common types of optical spectrometers used are ellipsometers and spectrophotometers. However these ins...

Crystallization Kinetics Of Inxsey Thin Films For Phase Change Memory (Pram) Applications

ABSTRACT Chalcogenide phase change memory is a potential replacement to flash memory due to excellent properties such as high storage density, rapid phase transition and archival stability. Phase change non-volatile semiconductor memory technology is based on an electrically initiated, reversible rapid amorphous-to-crystalline phase change process in multicomponent chalcogenide alloy materials similar to those used in rewritable optical disks. For over a decade Ge2Sb2Te5 (GST) compound has be...

Perception Of Chemistry Teachers Towards Use Of Electronic Media For Instruction In Public Secondary Schools In Nairobi County- Kenya

ABSTRACT Information Communication Technologies (ICTs) have become the fundamental pillars of the modern society today. They have brought along a lot of changes, many of them deep-seated, in almost all the aspects of societal functions and services. Just like any other field, the field of education has been greatly influenced by advancement in technology. Ultimately this has led to changes in teaching, learning and research. Despite the potential that ICTs have in enabling and enhancing a tea...

Optical And Electrical Characterization Of Znse-Cuxoy Thin Films For Solar Cell Applications

ABSTRACT Solar energy which is a free and abundant form of energy has the potential to provide sufficient power to the growing number of industries and population especially in the developing world. Its maximum exploitation has however been hindered by the high cost of silicon based solar cells which currently dominate the market. It has been reported that copper based thin film solar cell technology is known to be 40% cheaper than silicon based solar cells. In order to effectively exploit s...

Characterization Of SnSe-CdO:Sn P-N Junction For Solar Cell Applications

ABSTRACT Energy crisis occasioned by a decline in the availability of fossil fuels and increasing carbon dioxide emissions that are causing global warming has enhanced interest in the development of clean and renewable sources of energy. Solar energy has a great potential of meeting a large fraction of energy needs using photovoltaics. While most PV cells in use today are Silicon-based, cells of other semiconductor materials have been manufactured. Considerable research has been focused in se...


691 - 705 Of 3372 Results
@